From: Xiaolei Wang <xiaolei.wang@xxxxxxxxxxxxx> [ Upstream commit 0a2b96e42a0284c4fc03022236f656a085ca714a ] If the tuning step is not set, the tuning step is set to 1. For some sd cards, the following Tuning timeout will occur. Tuning failed, falling back to fixed sampling clock So set the default tuning step. This refers to the NXP vendor's commit below: https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/ arch/arm/boot/dts/imx6sx.dtsi#L1108-L1109 Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting") Signed-off-by: Xiaolei Wang <xiaolei.wang@xxxxxxxxxxxxx> Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm/boot/dts/imx6sx.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 8bef5440278ba..3e779fd0a3961 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -981,6 +981,8 @@ <&clks IMX6SX_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -993,6 +995,8 @@ <&clks IMX6SX_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -1005,6 +1009,8 @@ <&clks IMX6SX_CLK_USDHC3>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; -- 2.40.1
