On Thu, Aug 17, 2023 at 4:14 AM Huacai Chen <chenhuacai@xxxxxxxxxxx> wrote:
>
> The KGDB initial breakpoint gets an rcu stall warning after commit
> a80be428fbc1f1f3bc9ed924 ("rcu: Do not disable GP stall detection in
> rcu_cpu_stall_reset()").
>
> [ 53.452051] rcu: INFO: rcu_preempt self-detected stall on CPU
> [ 53.487950] rcu: 3-...0: (1 ticks this GP) idle=0e2c/1/0x4000000000000000 softirq=375/375 fqs=8
> [ 53.528243] rcu: (t=12297 jiffies g=-995 q=1 ncpus=4)
> [ 53.564840] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc2+ #4848
> [ 53.603005] Hardware name: Loongson Loongson-3A5000-HV-7A2000-1w-V0.1-CRB/Loongson-LS3A5000-7A2000-1w-CRB-V1.21, BIOS Loongson-UDK2018-V2.0.05099-beta8 08
> [ 53.682062] pc 9000000000332100 ra 90000000003320f4 tp 90000001000a0000 sp 90000001000a3710
> [ 53.724934] a0 9000000001d4b488 a1 0000000000000000 a2 0000000000000001 a3 0000000000000000
> [ 53.768179] a4 9000000001d526c8 a5 90000001000a38f0 a6 000000000000002c a7 0000000000000000
> [ 53.810751] t0 00000000000002b0 t1 0000000000000004 t2 900000000131c9c0 t3 fffffffffffffffa
> [ 53.853249] t4 0000000000000080 t5 90000001002ac190 t6 0000000000000004 t7 9000000001912d58
> [ 53.895684] t8 0000000000000000 u0 90000000013141a0 s9 0000000000000028 s0 9000000001d512f0
> [ 53.937633] s1 9000000001d51278 s2 90000001000a3798 s3 90000000019fc410 s4 9000000001d4b488
> [ 53.979486] s5 9000000001d512f0 s6 90000000013141a0 s7 0000000000000078 s8 9000000001d4b450
> [ 54.021175] ra: 90000000003320f4 kgdb_cpu_enter+0x534/0x640
> [ 54.060150] ERA: 9000000000332100 kgdb_cpu_enter+0x540/0x640
> [ 54.098347] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
> [ 54.136621] PRMD: 0000000c (PPLV0 +PIE +PWE)
> [ 54.172192] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
> [ 54.207838] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
> [ 54.242503] ESTAT: 00000800 [INT] (IS=11 ECode=0 EsubCode=0)
> [ 54.277996] PRID: 0014c011 (Loongson-64bit, Loongson-3A5000-HV)
> [ 54.313544] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc2+ #4848
> [ 54.430170] Stack : 0072617764726148 0000000000000000 9000000000223504 90000001000a0000
> [ 54.472308] 9000000100073a90 9000000100073a98 0000000000000000 9000000100073bd8
> [ 54.514413] 9000000100073bd0 9000000100073bd0 9000000100073a00 0000000000000001
> [ 54.556018] 0000000000000001 9000000100073a98 99828271f24e961a 90000001002810c0
> [ 54.596924] 0000000000000001 0000000000010003 0000000000000000 0000000000000001
> [ 54.637115] ffff8000337cdb80 0000000000000001 0000000006360000 900000000131c9c0
> [ 54.677049] 0000000000000000 0000000000000000 90000000017b4c98 9000000001912000
> [ 54.716394] 9000000001912f68 9000000001913000 9000000001912f70 00000000000002b0
> [ 54.754880] 90000000014a8840 0000000000000000 900000000022351c 0000000000000000
> [ 54.792372] 00000000000002b0 000000000000000c 0000000000000000 0000000000071c1c
> [ 54.829302] ...
> [ 54.859163] Call Trace:
> [ 54.859165] [<900000000022351c>] show_stack+0x5c/0x180
> [ 54.918298] [<90000000012f6100>] dump_stack_lvl+0x60/0x88
> [ 54.949251] [<90000000012dd5d8>] rcu_dump_cpu_stacks+0xf0/0x148
> [ 54.981116] [<90000000002d2fb8>] rcu_sched_clock_irq+0xb78/0xe60
> [ 55.012744] [<90000000002e47cc>] update_process_times+0x6c/0xc0
> [ 55.044169] [<90000000002f65d4>] tick_sched_timer+0x54/0x100
> [ 55.075488] [<90000000002e5174>] __hrtimer_run_queues+0x154/0x240
> [ 55.107347] [<90000000002e6288>] hrtimer_interrupt+0x108/0x2a0
> [ 55.139112] [<9000000000226418>] constant_timer_interrupt+0x38/0x60
> [ 55.170749] [<90000000002b3010>] __handle_irq_event_percpu+0x50/0x160
> [ 55.203141] [<90000000002b3138>] handle_irq_event_percpu+0x18/0x80
> [ 55.235064] [<90000000002b9d54>] handle_percpu_irq+0x54/0xa0
> [ 55.266241] [<90000000002b2168>] generic_handle_domain_irq+0x28/0x40
> [ 55.298466] [<9000000000aba95c>] handle_cpu_irq+0x5c/0xa0
> [ 55.329749] [<90000000012f7270>] handle_loongarch_irq+0x30/0x60
> [ 55.361476] [<90000000012f733c>] do_vint+0x9c/0x100
> [ 55.391737] [<9000000000332100>] kgdb_cpu_enter+0x540/0x640
> [ 55.422440] [<9000000000332b64>] kgdb_handle_exception+0x104/0x180
> [ 55.452911] [<9000000000232478>] kgdb_loongarch_notify+0x38/0xa0
> [ 55.481964] [<900000000026b4d4>] notify_die+0x94/0x100
> [ 55.509184] [<90000000012f685c>] do_bp+0x21c/0x340
> [ 55.562475] [<90000000003315b8>] kgdb_compiled_break+0x0/0x28
> [ 55.590319] [<9000000000332e80>] kgdb_register_io_module+0x160/0x1c0
> [ 55.618901] [<9000000000c0f514>] configure_kgdboc+0x154/0x1c0
> [ 55.647034] [<9000000000c0f5e0>] kgdboc_probe+0x60/0x80
> [ 55.674647] [<9000000000c96da8>] platform_probe+0x68/0x100
> [ 55.702613] [<9000000000c938e0>] really_probe+0xc0/0x340
> [ 55.730528] [<9000000000c93be4>] __driver_probe_device+0x84/0x140
> [ 55.759615] [<9000000000c93cdc>] driver_probe_device+0x3c/0x120
> [ 55.787990] [<9000000000c93e8c>] __device_attach_driver+0xcc/0x160
> [ 55.817145] [<9000000000c91290>] bus_for_each_drv+0x90/0x100
> [ 55.845654] [<9000000000c94328>] __device_attach+0xa8/0x1a0
> [ 55.874145] [<9000000000c925f0>] bus_probe_device+0xb0/0xe0
> [ 55.902572] [<9000000000c8ec7c>] device_add+0x65c/0x860
> [ 55.930635] [<9000000000c96704>] platform_device_add+0x124/0x2c0
> [ 55.959669] [<9000000001452b38>] init_kgdboc+0x58/0xa0
> [ 55.987677] [<900000000022015c>] do_one_initcall+0x7c/0x1e0
> [ 56.016134] [<9000000001420f1c>] kernel_init_freeable+0x22c/0x2a0
> [ 56.045128] [<90000000012f923c>] kernel_init+0x20/0x124
>
> Currently rcu_cpu_stall_reset() set rcu_state.jiffies_stall to one check
> period later, i.e. jiffies + rcu_jiffies_till_stall_check(). But jiffies
> is only updated in the timer interrupt, so when kgdb_cpu_enter() begins
> to run there may already be nearly one rcu check period after jiffies.
> Since all interrupts are disabled during kgdb_cpu_enter(), jiffies will
> not be updated. When kgdb_cpu_enter() returns, rcu_state.jiffies_stall
> maybe already gets timeout.
>
> We can set rcu_state.jiffies_stall to two rcu check periods later, e.g.
> jiffies + (rcu_jiffies_till_stall_check() * 2) in rcu_cpu_stall_reset()
> to avoid this problem. But this isn't a complete solution because kgdb
> may take a very long time in irq disabled context.
>
> Instead, update jiffies at the beginning of rcu_cpu_stall_reset() can
> solve all kinds of problems [1]. But this causes a new problem because
> updating jiffies is not NMI safe while rcu_cpu_stall_reset() may be used
> in NMI context.
>
> So we don't update the global jiffies, but only add the time 'delta' to
> jiffies locally at the beginning of rcu_cpu_stall_reset() which has the
> same effect.
>
> [1] https://lore.kernel.org/rcu/20230814020045.51950-1-chenhuacai@xxxxxxxxxxx/T/#t
>
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: a80be428fbc1f1f3bc9ed924 ("rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()")
> Reported-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
> Signed-off-by: Huacai Chen <chenhuacai@xxxxxxxxxxx>
> ---
> kernel/rcu/tree_stall.h | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/kernel/rcu/tree_stall.h b/kernel/rcu/tree_stall.h
> index b10b8349bb2a..1bf1306cae23 100644
> --- a/kernel/rcu/tree_stall.h
> +++ b/kernel/rcu/tree_stall.h
> @@ -153,8 +153,12 @@ static void panic_on_rcu_stall(void)
> */
> void rcu_cpu_stall_reset(void)
> {
> + unsigned long delta;
> +
> + delta = nsecs_to_jiffies(ktime_get_ns() - ktime_get_coarse_ns());
> +
> WRITE_ONCE(rcu_state.jiffies_stall,
> - jiffies + rcu_jiffies_till_stall_check());
> + jiffies + delta + rcu_jiffies_till_stall_check());
This is certainly better than magic numbers, but I was still wondering
how the delta really works. What are typical values of delta, and why
is that equivalent to updating jiffies?
Can you provide more technical details about why it turns out to be
effectively the number of jiffies that the jiffies are off by?
Also, how often do you see that an NMI is required to prevent a KGDB
stall? If not, just do:
void rcu_cpu_stall_reset(void) {
[...]
if (!in_nmi) {
do_jiffies_update();
}
WRITE_ONCE(rcu_state.jiffies_stall, ..);
[...]
}
?
But if your solution provides accurate results, that's fine with me. I
just don't understand coarse ktime that much and how it differs from
regular ktime, so I appreciate the education ;-)
Nice work, thanks,
- Joel
