The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x 1516ee035df32115197cd93ae3619dba7b020986 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2023081336-cameo-challenge-c72b@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: 1516ee035df3 ("scsi: qedi: Fix firmware halt over suspend and resume") 96a766a789eb ("scsi: qedi: Add support for handling PCIe errors") f4ba4e55db6d ("scsi: qedi: Add firmware error recovery invocation support") 5c35e4646566 ("scsi: qedi: Skip firmware connection termination for PCI shutdown handler") e4020e0835ed ("scsi: qedi: Remove 2 set but unused variables") 4f93c4bf0f74 ("scsi: qedi: Add PCI shutdown handler support") 4b1068f5d74b ("scsi: qedi: Add MFW error recovery process") 2bfbc570586e ("qedi: Use hwfns and affin_hwfn_idx to get MSI-X vector index") 13b99d3d3907 ("Revert "scsi: qedi: Allocate IRQs based on msix_cnt"") dcceeeb71fb7 ("scsi: qedi: add module param to set ping packet size") 1a291bce5eaf ("scsi: qedi: Allocate IRQs based on msix_cnt") 3fb5a21fd008 ("scsi: qedi: Cleanup redundant QEDI_PAGE_SIZE macro definition") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1516ee035df32115197cd93ae3619dba7b020986 Mon Sep 17 00:00:00 2001 From: Nilesh Javali <njavali@xxxxxxxxxxx> Date: Mon, 7 Aug 2023 15:07:25 +0530 Subject: [PATCH] scsi: qedi: Fix firmware halt over suspend and resume While performing certain power-off sequences, PCI drivers are called to suspend and resume their underlying devices through PCI PM (power management) interface. However the hardware does not support PCI PM suspend/resume operations so system wide suspend/resume leads to bad MFW (management firmware) state which causes various follow-up errors in driver when communicating with the device/firmware. To fix this driver implements PCI PM suspend handler to indicate unsupported operation to the PCI subsystem explicitly, thus avoiding system to go into suspended/standby mode. Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx> Link: https://lore.kernel.org/r/20230807093725.46829-2-njavali@xxxxxxxxxxx Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c index 77a56a136678..cd0180b1f5b9 100644 --- a/drivers/scsi/qedi/qedi_main.c +++ b/drivers/scsi/qedi/qedi_main.c @@ -69,6 +69,7 @@ static struct nvm_iscsi_block *qedi_get_nvram_block(struct qedi_ctx *qedi); static void qedi_recovery_handler(struct work_struct *work); static void qedi_schedule_hw_err_handler(void *dev, enum qed_hw_err_type err_type); +static int qedi_suspend(struct pci_dev *pdev, pm_message_t state); static int qedi_iscsi_event_cb(void *context, u8 fw_event_code, void *fw_handle) { @@ -2511,6 +2512,22 @@ static void qedi_shutdown(struct pci_dev *pdev) __qedi_remove(pdev, QEDI_MODE_SHUTDOWN); } +static int qedi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct qedi_ctx *qedi; + + if (!pdev) { + QEDI_ERR(NULL, "pdev is NULL.\n"); + return -ENODEV; + } + + qedi = pci_get_drvdata(pdev); + + QEDI_ERR(&qedi->dbg_ctx, "%s: Device does not support suspend operation\n", __func__); + + return -EPERM; +} + static int __qedi_probe(struct pci_dev *pdev, int mode) { struct qedi_ctx *qedi; @@ -2869,6 +2886,7 @@ static struct pci_driver qedi_pci_driver = { .remove = qedi_remove, .shutdown = qedi_shutdown, .err_handler = &qedi_err_handler, + .suspend = qedi_suspend, }; static int __init qedi_init(void)
