The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x a41e19cc0d6b6a445a4133170b90271e4a2553dc # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2023081227-expiring-dramatize-5e0f@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From a41e19cc0d6b6a445a4133170b90271e4a2553dc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alvin=20=C5=A0ipraga?= <alsi@xxxxxxxxxxxxxxx> Date: Mon, 19 Jun 2023 16:12:39 +0200 Subject: [PATCH] iio: adc: ina2xx: avoid NULL pointer dereference on OF device match MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The affected lines were resulting in a NULL pointer dereference on our platform because the device tree contained the following list of compatible strings: power-sensor@40 { compatible = "ti,ina232", "ti,ina231"; ... }; Since the driver doesn't declare a compatible string "ti,ina232", the OF matching succeeds on "ti,ina231". But the I2C device ID info is populated via the first compatible string, cf. modalias population in of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy I2C device ID table either, the struct i2c_device_id *id pointer in the probe function is NULL. Fix this by using the already populated type variable instead, which points to the proper driver data. Since the name is also wanted, add a generic one to the ina2xx_config table. Signed-off-by: Alvin Šipraga <alsi@xxxxxxxxxxxxxxx> Fixes: c43a102e67db ("iio: ina2xx: add support for TI INA2xx Power Monitors") Link: https://lore.kernel.org/r/20230619141239.2257392-1-alvin@xxxxxxx Cc: <Stable@xxxxxxxxxxxxxxx> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c index 213526c1592f..aea83f369437 100644 --- a/drivers/iio/adc/ina2xx-adc.c +++ b/drivers/iio/adc/ina2xx-adc.c @@ -124,6 +124,7 @@ static const struct regmap_config ina2xx_regmap_config = { enum ina2xx_ids { ina219, ina226 }; struct ina2xx_config { + const char *name; u16 config_default; int calibration_value; int shunt_voltage_lsb; /* nV */ @@ -155,6 +156,7 @@ struct ina2xx_chip_info { static const struct ina2xx_config ina2xx_config[] = { [ina219] = { + .name = "ina219", .config_default = INA219_CONFIG_DEFAULT, .calibration_value = 4096, .shunt_voltage_lsb = 10000, @@ -164,6 +166,7 @@ static const struct ina2xx_config ina2xx_config[] = { .chip_id = ina219, }, [ina226] = { + .name = "ina226", .config_default = INA226_CONFIG_DEFAULT, .calibration_value = 2048, .shunt_voltage_lsb = 2500, @@ -996,7 +999,7 @@ static int ina2xx_probe(struct i2c_client *client) /* Patch the current config register with default. */ val = chip->config->config_default; - if (id->driver_data == ina226) { + if (type == ina226) { ina226_set_average(chip, INA226_DEFAULT_AVG, &val); ina226_set_int_time_vbus(chip, INA226_DEFAULT_IT, &val); ina226_set_int_time_vshunt(chip, INA226_DEFAULT_IT, &val); @@ -1015,7 +1018,7 @@ static int ina2xx_probe(struct i2c_client *client) } indio_dev->modes = INDIO_DIRECT_MODE; - if (id->driver_data == ina226) { + if (type == ina226) { indio_dev->channels = ina226_channels; indio_dev->num_channels = ARRAY_SIZE(ina226_channels); indio_dev->info = &ina226_info; @@ -1024,7 +1027,7 @@ static int ina2xx_probe(struct i2c_client *client) indio_dev->num_channels = ARRAY_SIZE(ina219_channels); indio_dev->info = &ina219_info; } - indio_dev->name = id->name; + indio_dev->name = id ? id->name : chip->config->name; ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev, &ina2xx_setup_ops);
