[PATCH 4.19 181/323] scsi: qla2xxx: Wait for io return on terminate rport

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quinn Tran <qutran@xxxxxxxxxxx>

commit fc0cba0c7be8261a1625098bd1d695077ec621c9 upstream.

System crash due to use after free.
Current code allows terminate_rport_io to exit before making
sure all IOs has returned. For FCP-2 device, IO's can hang
on in HW because driver has not tear down the session in FW at
first sign of cable pull. When dev_loss_tmo timer pops,
terminate_rport_io is called and upper layer is about to
free various resources. Terminate_rport_io trigger qla to do
the final cleanup, but the cleanup might not be fast enough where it
leave qla still holding on to the same resource.

Wait for IO's to return to upper layer before resources are freed.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230428075339.32551-7-njavali@xxxxxxxxxxx
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_attr.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1800,6 +1800,7 @@ static void
 qla2x00_terminate_rport_io(struct fc_rport *rport)
 {
 	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+	scsi_qla_host_t *vha;
 
 	if (!fcport)
 		return;
@@ -1809,9 +1810,12 @@ qla2x00_terminate_rport_io(struct fc_rpo
 
 	if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
 		return;
+	vha = fcport->vha;
 
 	if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) {
 		qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16);
+		qla2x00_eh_wait_for_pending_commands(fcport->vha, fcport->d_id.b24,
+			0, WAIT_TARGET);
 		return;
 	}
 	/*
@@ -1826,6 +1830,15 @@ qla2x00_terminate_rport_io(struct fc_rpo
 		else
 			qla2x00_port_logout(fcport->vha, fcport);
 	}
+
+	/* check for any straggling io left behind */
+	if (qla2x00_eh_wait_for_pending_commands(fcport->vha, fcport->d_id.b24, 0, WAIT_TARGET)) {
+		ql_log(ql_log_warn, vha, 0x300b,
+		       "IO not return.  Resetting. \n");
+		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		qla2xxx_wake_dpc(vha);
+		qla2x00_wait_for_chip_reset(vha);
+	}
 }
 
 static int





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux