All the cases, were the DSDT IRQ settings should be used instead of
the MADT override, are for IRQ 1 (the PS/2 kbd IRQ).
Simplify things by always honering the override for GSI != 1
(for non DMI quirked cases).
This allows removing the DMI quirks to honor the override for
some non IRQ 1 IRQs on some AMD ZEN based Lenovo models.
Fixes: a9c4a912b7dc ("ACPI: resource: Remove "Zen" specific match and quirks")
Cc: Mario Limonciello <mario.limonciello@xxxxxxx>
Cc: Linux regressions mailing list <regressions@xxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/acpi/resource.c | 28 ++++++++--------------------
1 file changed, 8 insertions(+), 20 deletions(-)
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 0800a9d77558..840b938a5fb0 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -470,24 +470,6 @@ static const struct dmi_system_id asus_laptop[] = {
{ }
};
-static const struct dmi_system_id lenovo_laptop[] = {
- {
- .ident = "LENOVO IdeaPad Flex 5 14ALC7",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_NAME, "82R9"),
- },
- },
- {
- .ident = "LENOVO IdeaPad Flex 5 16ALC7",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_NAME, "82RA"),
- },
- },
- { }
-};
-
static const struct dmi_system_id tongfang_gm_rg[] = {
{
.ident = "TongFang GMxRGxx/XMG CORE 15 (M22)/TUXEDO Stellaris 15 Gen4 AMD",
@@ -539,8 +521,6 @@ struct irq_override_cmp {
static const struct irq_override_cmp override_table[] = {
{ medion_laptop, 1, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, false },
{ asus_laptop, 1, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, false },
- { lenovo_laptop, 6, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, true },
- { lenovo_laptop, 10, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, true },
{ tongfang_gm_rg, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
{ maingear_laptop, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
{ lg_laptop, 1, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, false },
@@ -562,6 +542,14 @@ static bool acpi_dev_irq_override(u32 gsi, u8 triggering, u8 polarity,
return entry->override;
}
+ /*
+ * Always use the MADT override info, except for IRQ 1 for IRQ1
+ * the DSDT IRQ settings should sometimes be used otherwise
+ * PS/2 keyboards will not work.
+ */
+ if (gsi != 1)
+ return true;
+
#ifdef CONFIG_X86
/*
* IRQ override isn't needed on modern AMD Zen systems and
