This is a note to let you know that I've just added the patch titled
usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-next branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will also be merged in the next major kernel release
during the merge window.
If you have any questions about this process, please let me know.
>From 36668515d56bf73f06765c71e08c8f7465f1e5c4 Mon Sep 17 00:00:00 2001
From: Xu Yang <xu.yang_2@xxxxxxx>
Date: Tue, 27 Jun 2023 19:21:24 +0800
Subject: usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0
In current driver, the value of tuning parameter will not take effect
if samsung,picophy-* is assigned as 0. Because 0 is also a valid value
acccording to the description of USB_PHY_CFG1 register, this will improve
the logic to let it work.
Fixes: 58a3cefb3840 ("usb: chipidea: imx: add two samsung picophy parameters tuning implementation")
cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
Acked-by: Peter Chen <peter.chen@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230627112126.1882666-1-xu.yang_2@xxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 10 ++++++----
drivers/usb/chipidea/usbmisc_imx.c | 6 ++++--
2 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index aa2aebed8e2d..c251a4f34879 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -176,10 +176,12 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
data->ulpi = 1;
- of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
- &data->emp_curr_control);
- of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
- &data->dc_vol_level_adjust);
+ if (of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
+ &data->emp_curr_control))
+ data->emp_curr_control = -1;
+ if (of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
+ &data->dc_vol_level_adjust))
+ data->dc_vol_level_adjust = -1;
return data;
}
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index e8a712e5abad..c4165f061e42 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -660,13 +660,15 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
usbmisc->base + MX7D_USBNC_USB_CTRL2);
/* PHY tuning for signal quality */
reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
- if (data->emp_curr_control && data->emp_curr_control <=
+ if (data->emp_curr_control >= 0 &&
+ data->emp_curr_control <=
(TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) {
reg &= ~TXPREEMPAMPTUNE0_MASK;
reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT);
}
- if (data->dc_vol_level_adjust && data->dc_vol_level_adjust <=
+ if (data->dc_vol_level_adjust >= 0 &&
+ data->dc_vol_level_adjust <=
(TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) {
reg &= ~TXVREFTUNE0_MASK;
reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT);
--
2.41.0
