From: Chu Lin <linchuyuan@xxxxxxxxxx> [ Upstream commit 9da9c2dc57b2fa2e65521894cb66df4bf615214d ] adm1272 supports temperature reporting but it is disabled by default. Tested: ls temp1_* temp1_crit temp1_highest temp1_max temp1_crit_alarm temp1_input temp1_max_alarm cat temp1_input 26642 Signed-off-by: Chu Lin <linchuyuan@xxxxxxxxxx> Link: https://lore.kernel.org/r/20210512171043.2433694-1-linchuyuan@xxxxxxxxxx [groeck: Updated subject to reflect correct driver] Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> Stable-dep-of: b153a0bb4199 ("hwmon: (pmbus/adm1275) Fix problems with temperature monitoring on ADM1272") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/hwmon/pmbus/adm1275.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c index e7997f37b2666..0be1b5777d2f0 100644 --- a/drivers/hwmon/pmbus/adm1275.c +++ b/drivers/hwmon/pmbus/adm1275.c @@ -611,11 +611,13 @@ static int adm1275_probe(struct i2c_client *client) tindex = 8; info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; - /* Enable VOUT if not enabled (it is disabled by default) */ - if (!(config & ADM1278_VOUT_EN)) { - config |= ADM1278_VOUT_EN; + /* Enable VOUT & TEMP1 if not enabled (disabled by default) */ + if ((config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) != + (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) { + config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN; ret = i2c_smbus_write_byte_data(client, ADM1275_PMON_CONFIG, config); @@ -625,10 +627,6 @@ static int adm1275_probe(struct i2c_client *client) return -ENODEV; } } - - if (config & ADM1278_TEMP1_EN) - info->func[0] |= - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; if (config & ADM1278_VIN_EN) info->func[0] |= PMBUS_HAVE_VIN; break; -- 2.39.2
