From: Linus Walleij <linus.walleij@xxxxxxxxxx>
[ Upstream commit 078dc5194c0ac1b8e2fc088be2168a1104e16f72 ]
The OMAP2 platform data quirk is using the global GPIO numberspace
to obtain two WLAN GPIOs to drive power and xcvr reset GPIO
lines during start-up.
Rewrite the quirk to use a GPIO descriptor table so we avoid using
global GPIO numbers.
This gets rid of the final dependency on the legacy <linux/gpio.h>
header from the OMAP2/3 platforms.
Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base")
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/mach-omap2/pdata-quirks.c | 41 ++++++++++++++++++++----------
1 file changed, 28 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 3264c4e77a8aa..c1c0121f478d6 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -8,7 +8,6 @@
#include <linux/davinci_emac.h>
#include <linux/gpio/machine.h>
#include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
@@ -178,25 +177,41 @@ static void __init am35xx_emac_reset(void)
omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
}
-static struct gpio cm_t3517_wlan_gpios[] __initdata = {
- { 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" },
- { 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" },
+static struct gpiod_lookup_table cm_t3517_wlan_gpio_table = {
+ .dev_id = NULL,
+ .table = {
+ GPIO_LOOKUP("gpio-48-53", 8, "power",
+ GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-0-15", 4, "noe",
+ GPIO_ACTIVE_HIGH),
+ { }
+ },
};
static void __init omap3_sbc_t3517_wifi_init(void)
{
- int err = gpio_request_array(cm_t3517_wlan_gpios,
- ARRAY_SIZE(cm_t3517_wlan_gpios));
- if (err) {
- pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
- return;
- }
+ struct gpio_desc *d;
- gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0);
- gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0);
+ gpiod_add_lookup_table(&cm_t3517_wlan_gpio_table);
+ /* This asserts the RESET line (reverse polarity) */
+ d = gpiod_get(NULL, "power", GPIOD_OUT_HIGH);
+ if (IS_ERR(d)) {
+ pr_err("Unable to get CM T3517 WLAN power GPIO descriptor\n");
+ } else {
+ gpiod_set_consumer_name(d, "wlan pwr");
+ gpiod_export(d, 0);
+ }
+
+ d = gpiod_get(NULL, "noe", GPIOD_OUT_HIGH);
+ if (IS_ERR(d)) {
+ pr_err("Unable to get CM T3517 WLAN XCVR NOE GPIO descriptor\n");
+ } else {
+ gpiod_set_consumer_name(d, "xcvr noe");
+ gpiod_export(d, 0);
+ }
msleep(100);
- gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
+ gpiod_set_value(d, 0);
}
static struct gpiod_lookup_table omap3_sbc_t3517_usb_gpio_table = {
--
2.39.2
