Re: [PATCH] ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12.07.2023 17:23, Andrew Lunn wrote:
--- a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
@@ -19,7 +19,8 @@ chosen {
memory@0 {
  		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;

So there is a hole in the middle? Does this require any special
CONFIG_ option to support sparse memory?

This is how RAM is mapped on all known Northstar devices. Using two
blocks.

I've heard there is a way to design Northstar SoC board to have all RAM
in one region but thay requires disabling something (I don't remember
what) and in practice to vendor decided to do that.

AFAIK no extra CONFIG_* option is needed to make Linux map multiple RAM
regions.



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux