Hi Linus,
Am 2023-07-12 00:02, schrieb Linus Walleij:
The Winbond W25Q128 (actual vendor name W25Q128JV)
Not necessarily see below. Do you know what part numbers is
written on your flash?
has exactly the same flags as the sibling device
w25q128fw. The devices both require unlocking and
support dual and quad SPI transport.
The actual product naming between devices:
0xef4018: "w25q128" W25Q128JV-IM/JM
0xef7018: "w25q128fw" W25Q128JV-IN/IQ/JQ
Where do you get that string? from winbond.c? Because,
then it's incorrect. For 0xef7018 its actually w25q128jv.
But that being said, Winbond is known to reuse the IDs among its
flashes. From a quick look at various datasheets:
0x60 seems to be DW, FW and NW(Q) series
0x70 seems to be JV(M)
0x80 seems to be NW(M)
0x40 seems to be BV, JV(Q), "V" (probably the first [1])
(Q) denotes the fixed quad enable bit.
Now 0x40 are the first ones who where added back in the days. I'm
not sure, what kind of winbond devices there were and if they
support dual/quad read.
Normally, you'd use a .fixups (see w25q256_fixups for example) to
dynamically detect the newer flash type and then refine the flags.
But because we don't know how the older flashes look like, that
would be just guessing :/ Although, I've once thought about
fingerprinting the SFDP tables eg. by some hash. But that would
assume the SFDP data is not changing a lot on a given device. Not
sure if that is the case, we just began to collect SFDP tables
of various devices.
If it turns out that only SPI_NOR_HAS_LOCK and SPI_NOR_HAS_TB
is needed, I'm leaning towards just adding these flags to the
w25q128 entry. According to [1] this was already supported
back in the days.
The latter device, "w25q128fw" supports features
named DTQ and QPI, otherwise it is the same.
Not having the right flags has the annoying side
effect that write access does not work.
This should only apply to FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB).
I'd guess your flash supports SFDP, then the NO_SFDP_FLAGS should be
automatically detected. Could you please dump the SFDP tables
(described in [2])?
After this patch I can write to the flash on the
Inteno XG6846 router.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/mtd/spi-nor/winbond.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/winbond.c
b/drivers/mtd/spi-nor/winbond.c
index 834d6ba5ce70..a67e1d4206f3 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -121,7 +121,9 @@ static const struct flash_info winbond_nor_parts[]
= {
{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16)
NO_SFDP_FLAGS(SECT_4K) },
{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256)
- NO_SFDP_FLAGS(SECT_4K) },
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
As mentioned above, could you try without the DUAL_READ/QUAD_READ flags.
You can have a look at the debugfs whether the detected capabilities
are still the same with and without these flags.
-michael
[1] https://www.elinux.org/images/f/f5/Winbond-w25q32.pdf
[2]
https://lore.kernel.org/all/4304e19f3399a0a6e856119d01ccabe0@xxxxxxxx/
