From: Vinod Polimera <quic_vpolimer@xxxxxxxxxxx> [ Upstream commit e3969eadc8ee78a5bdca65b8ed0a421a359e4090 ] Recommended way of reading the interface timing gen status is via status register. Timing gen status register will give a reliable status of the interface especially during ON/OFF transitions. This support was added from DPU version 5.0.0. Signed-off-by: Vinod Polimera <quic_vpolimer@xxxxxxxxxxx> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Patchwork: https://patchwork.freedesktop.org/patch/524724/ Link: https://lore.kernel.org/r/1677774797-31063-6-git-send-email-quic_vpolimer@xxxxxxxxxxx Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Stable-dep-of: a7129231edf3 ("drm/msm/dpu: Set DPU_DATA_HCTL_EN for in INTF_SC7180_MASK") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 3 ++- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 12 +++++++----- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 8 +++++++- 3 files changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index f7214c4401e19..900cdb40c7b40 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -94,7 +94,8 @@ #define INTF_SDM845_MASK (0) -#define INTF_SC7180_MASK BIT(DPU_INTF_INPUT_CTRL) | BIT(DPU_INTF_TE) +#define INTF_SC7180_MASK \ + (BIT(DPU_INTF_INPUT_CTRL) | BIT(DPU_INTF_TE) | BIT(DPU_INTF_STATUS_SUPPORTED)) #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index 5f96dd8def092..d7d45e1e7b310 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -214,17 +214,19 @@ enum { /** * INTF sub-blocks - * @DPU_INTF_INPUT_CTRL Supports the setting of pp block from which - * pixel data arrives to this INTF - * @DPU_INTF_TE INTF block has TE configuration support - * @DPU_DATA_HCTL_EN Allows data to be transferred at different rate - than video timing + * @DPU_INTF_INPUT_CTRL Supports the setting of pp block from which + * pixel data arrives to this INTF + * @DPU_INTF_TE INTF block has TE configuration support + * @DPU_DATA_HCTL_EN Allows data to be transferred at different rate + * than video timing + * @DPU_INTF_STATUS_SUPPORTED INTF block has INTF_STATUS register * @DPU_INTF_MAX */ enum { DPU_INTF_INPUT_CTRL = 0x1, DPU_INTF_TE, DPU_DATA_HCTL_EN, + DPU_INTF_STATUS_SUPPORTED, DPU_INTF_MAX }; diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c index b2a94b9a3e987..b9dddf576c029 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c @@ -57,6 +57,7 @@ #define INTF_PROG_FETCH_START 0x170 #define INTF_PROG_ROT_START 0x174 #define INTF_MUX 0x25C +#define INTF_STATUS 0x26C #define INTF_CFG_ACTIVE_H_EN BIT(29) #define INTF_CFG_ACTIVE_V_EN BIT(30) @@ -292,8 +293,13 @@ static void dpu_hw_intf_get_status( struct intf_status *s) { struct dpu_hw_blk_reg_map *c = &intf->hw; + unsigned long cap = intf->cap->features; + + if (cap & BIT(DPU_INTF_STATUS_SUPPORTED)) + s->is_en = DPU_REG_READ(c, INTF_STATUS) & BIT(0); + else + s->is_en = DPU_REG_READ(c, INTF_TIMING_ENGINE_EN); - s->is_en = DPU_REG_READ(c, INTF_TIMING_ENGINE_EN); s->is_prog_fetch_en = !!(DPU_REG_READ(c, INTF_CONFIG) & BIT(31)); if (s->is_en) { s->frame_count = DPU_REG_READ(c, INTF_FRAME_COUNT); -- 2.39.2
