It is incorrect to calculate number of OOB bytes for ECC engine using
some "already known" ECC step size (1024 bytes here). Number of such
bytes for ECC engine must be whole OOB except 2 bytes for bad block
marker, while proper ECC step size and strength will be selected by
ECC logic.
Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Cc: <Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Arseniy Krasnov <AVKrasnov@xxxxxxxxxxxxxx>
---
drivers/mtd/nand/raw/meson_nand.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 369e81356240..c7213f03a773 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1301,7 +1301,6 @@ static int meson_nand_attach_chip(struct nand_chip *nand)
struct meson_nfc *nfc = nand_get_controller_data(nand);
struct meson_nfc_nand_chip *meson_chip = to_meson_nand(nand);
struct mtd_info *mtd = nand_to_mtd(nand);
- int nsectors = mtd->writesize / 1024;
int raw_writesize;
int ret;
@@ -1327,7 +1326,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand)
nand->options |= NAND_NO_SUBPAGE_WRITE;
ret = nand_ecc_choose_conf(nand, nfc->data->ecc_caps,
- mtd->oobsize - 2 * nsectors);
+ mtd->oobsize - 2);
if (ret) {
dev_err(nfc->dev, "failed to ECC init\n");
return -EINVAL;
--
2.35.0
