From: Damien Le Moal <dlemoal@xxxxxxxxxx> [ Upstream commit 6aa0365a3c8512587fffd42fe438768709ddef8e ] When an ATA port is resumed from sleep, the port is reset and a power management request issued to libata EH to reset the port and rescanning the device(s) attached to the port. Device rescanning is done by scheduling an ata_scsi_dev_rescan() work, which will execute scsi_rescan_device(). However, scsi_rescan_device() takes the generic device lock, which is also taken by dpm_resume() when the SCSI device is resumed as well. If a device rescan execution starts before the completion of the SCSI device resume, the rcu locking used to refresh the cached VPD pages of the device, combined with the generic device locking from scsi_rescan_device() and from dpm_resume() can cause a deadlock. Avoid this situation by changing struct ata_port scsi_rescan_task to be a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is modified to check if the SCSI device associated with the ATA device that must be rescanned is not suspended. If the SCSI device is still suspended, ata_scsi_dev_rescan() returns early and reschedule itself for execution after an arbitrary delay of 5ms. Reported-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> Reported-by: Joe Breuer <linux-kernel@xxxxxxxxxxxx> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530 Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx> Reviewed-by: Hannes Reinecke <hare@xxxxxxx> Tested-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> Tested-by: Joe Breuer <linux-kernel@xxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/ata/libata-core.c | 3 ++- drivers/ata/libata-eh.c | 2 +- drivers/ata/libata-scsi.c | 22 +++++++++++++++++++++- include/linux/libata.h | 2 +- 4 files changed, 25 insertions(+), 4 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index a5ea144722fa3..0ba0c3d1613f1 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5313,7 +5313,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) mutex_init(&ap->scsi_scan_mutex); INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); - INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); + INIT_DELAYED_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); INIT_LIST_HEAD(&ap->eh_done_q); init_waitqueue_head(&ap->eh_wait_q); init_completion(&ap->park_req_pending); @@ -5919,6 +5919,7 @@ static void ata_port_detach(struct ata_port *ap) WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED)); cancel_delayed_work_sync(&ap->hotplug_task); + cancel_delayed_work_sync(&ap->scsi_rescan_task); skip_eh: /* clean up zpodd on port removal */ diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 08e11bc312c28..a3ae5fc2a42fc 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2973,7 +2973,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, ehc->i.flags |= ATA_EHI_SETMODE; /* schedule the scsi_rescan_device() here */ - schedule_work(&(ap->scsi_rescan_task)); + schedule_delayed_work(&ap->scsi_rescan_task, 0); } else if (dev->class == ATA_DEV_UNKNOWN && ehc->tries[dev->devno] && ata_class_enabled(ehc->classes[dev->devno])) { diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 39e1ff9b686b9..9c0052d28078a 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -4601,10 +4601,11 @@ int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, void ata_scsi_dev_rescan(struct work_struct *work) { struct ata_port *ap = - container_of(work, struct ata_port, scsi_rescan_task); + container_of(work, struct ata_port, scsi_rescan_task.work); struct ata_link *link; struct ata_device *dev; unsigned long flags; + bool delay_rescan = false; mutex_lock(&ap->scsi_scan_mutex); spin_lock_irqsave(ap->lock, flags); @@ -4618,6 +4619,21 @@ void ata_scsi_dev_rescan(struct work_struct *work) if (scsi_device_get(sdev)) continue; + /* + * If the rescan work was scheduled because of a resume + * event, the port is already fully resumed, but the + * SCSI device may not yet be fully resumed. In such + * case, executing scsi_rescan_device() may cause a + * deadlock with the PM code on device_lock(). Prevent + * this by giving up and retrying rescan after a short + * delay. + */ + delay_rescan = sdev->sdev_gendev.power.is_suspended; + if (delay_rescan) { + scsi_device_put(sdev); + break; + } + spin_unlock_irqrestore(ap->lock, flags); scsi_rescan_device(&(sdev->sdev_gendev)); scsi_device_put(sdev); @@ -4627,4 +4643,8 @@ void ata_scsi_dev_rescan(struct work_struct *work) spin_unlock_irqrestore(ap->lock, flags); mutex_unlock(&ap->scsi_scan_mutex); + + if (delay_rescan) + schedule_delayed_work(&ap->scsi_rescan_task, + msecs_to_jiffies(5)); } diff --git a/include/linux/libata.h b/include/linux/libata.h index fe990176e6ee9..9713f4d8f15f4 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -834,7 +834,7 @@ struct ata_port { struct mutex scsi_scan_mutex; struct delayed_work hotplug_task; - struct work_struct scsi_rescan_task; + struct delayed_work scsi_rescan_task; unsigned int hsm_task_state; -- 2.39.2
