Re: [PATCH 2/3] drm/i915/gt: Fix context workarounds with non-masked regs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 23, 2023 at 12:48:13PM -0700, Kenneth Graunke wrote:
On Friday, June 23, 2023 8:49:05 AM PDT Lucas De Marchi wrote:
On Thu, Jun 22, 2023 at 04:37:21PM -0700, Kenneth Graunke wrote:
>On Thursday, June 22, 2023 11:27:30 AM PDT Lucas De Marchi wrote:
>> Most of the context workarounds tweak masked registers, but not all. For
>> masked registers, when writing the value it's sufficient to just write
>> the wa->set_bits since that will take care of both the clr and set bits
>> as well as not overwriting other bits.
>>
>> However there are some workarounds, the registers are non-masked. Up
>> until now the driver was simply emitting a MI_LOAD_REGISTER_IMM with the
>> set_bits to program the register via the GPU in the WA bb. This has the
>> side effect of overwriting the content of the register outside of bits
>> that should be set and also doesn't handle the bits that should be
>> cleared.
>>
>> Kenneth reported that on DG2, mesa was seeing a weird behavior due to
>> the kernel programming of L3SQCREG5 in dg2_ctx_gt_tuning_init(). With
>> the GPU idle, that register could be read via intel_reg as 0x00e001ff,
>> but during a 3D workload it would change to 0x0000007f. So the
>> programming of that tuning was affecting more than the bits in
>> L3_PWM_TIMER_INIT_VAL_MASK. Matt Roper noticed the lack of rmw for the
>> context workarounds due to the use of MI_LOAD_REGISTER_IMM.
>>
>> So, for registers that are not masked, read its value via mmio, modify
>> and then set it in the buffer to be written by the GPU. This should take
>> care in a simple way of programming just the bits required by the
>> tuning/workaround. If in future there are registers that involved that
>> can't be read by the CPU, a more complex approach may be required like
>> a) issuing additional instructions to read and modify; or b) scan the
>> golden context and patch it in place before saving it; or something
>> else. But for now this should suffice.
>>
>> Scanning the context workarounds for all platforms, these are the
>> impacted ones with the respective registers
>>
>> 	mtl: DRAW_WATERMARK
>> 	mtl/dg2: XEHP_L3SQCREG5, XEHP_FF_MODE2
>> 	gen12: GEN12_FF_MODE2
>
>Speaking of GEN12_FF_MODE2...there's a big scary comment above that
>workaround write which says that register "will return the wrong value
>when read."  I think with this patch, we'll start doing a RMW cycle for
>the register, which could mix in some of this "wrong value".  The
>comment mentions that the intention is to write the whole register,
>as the default value is 0 for all fields.

Good point. That also means we don't need to backport this patch to
stable kernel to any gen12, since overwritting the other bits is
actually the intended behavior.

>
>Maybe what we want to do is change gen12_ctx_gt_tuning_init to do
>
>    wa_write(wal, GEN12_FF_MODE2, FF_MODE2_TDS_TIMER_128);
>
>so it has a clear mask of ~0 instead of FF_MODE2_TDS_TIMER_MASK, and

In order to ignore read back when verifying, we would still need to use
wa_add(), but changing the mask. We don't have a wa_write() that ends up
with { .clr = ~0, .read_mask = 0 }.

	wa_add(wal,
	       GEN12_FF_MODE2,
	       ~0, FF_MODE2_TDS_TIMER_128,
	       0, false);

Good point!  Though, I just noticed another bug here:

gen12_ctx_workarounds_init sets FF_MODE2_GS_TIMER_224 to avoid hangs
in the HS/DS unit, after gen12_ctx_gt_tuning_init set TDS_TIMER_128
for performance.  One of those is going to clobber the other; we're
likely losing the TDS tuning today.  Combining those workarounds into

we are not losing it today. As long as the wa list is the same, we do detect collisions when
adding workarounds and they are coallesced before applying. However,
indeed if we change this to make clear be ~0, then they will collide and
we will see a warning.

Applying them together in a single operation would indeed solve it
with a side-effect of moving this back to the workarounds. Either that
or

a) we handle the read_back == 0 && clear == U32_MAX specially when
   adding WAs. If that is true, then the check for collisions can
   be adjusted to allow that.

b) we give up on this approach and proceed with one of

	1) scan the ctx wa list. If it has any non-masked register,
	   we submit a job to read it from the GPU side. MCR will
	   make this harder as the steering from the GPU side is
	   different than the CPU

	2) emit additional commands to read and modify the register from
	   the GPU side

	3) find the register in the golden context and patch it in place




one place seems like an easy way to fix that.

I'm leaning towards this option in the hope we don't have have
another GEN12_FF_MODE2 in future.

Matt, we've been pushing towards separating the tuning from the WAs, but
here we'd go the other way. Anything against doing this for now?

thanks
Lucas De Marchi


>then in this patch update your condition below from
>
>+		if (wa->masked_reg || wa->set == U32_MAX) {
>
>to
>
>+		if (wa->masked_reg || wa->set == U32_MAX || wa->clear == U32_MAX) {

yeah... and maybe also warn if wa->read is 0, which means it's one
of the registers we can't/shouldn't read from the CPU.

>
>because if we're clearing all bits then we don't care about doing a
>read-modify-write either.

thanks
Lucas De Marchi

>
>--Ken









[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux