[PATCH 5.10 87/89] drm/i915/dg1: Wait for pcode/uncore handshake at startup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Matt Roper <matthew.d.roper@xxxxxxxxx>

[ Upstream commit f9c730ede7d3f40900cb493890d94d868ff2f00f ]

DG1 does some additional pcode/uncore handshaking at
boot time; this handshaking must complete before various other pcode
commands are effective and before general work is submitted to the GPU.
We need to poll a new pcode mailbox during startup until it reports that
this handshaking is complete.

The bspec doesn't give guidance on how long we may need to wait for this
handshaking to complete.  For now, let's just set a really long timeout;
if we still don't get a completion status by the end of that timeout,
we'll just continue on and hope for the best.

v2 (Lucas): Rename macros to make clear the relation between command and
   result (requested by José)

Bspec: 52065
Cc: Clinton Taylor <Clinton.A.Taylor@xxxxxxxxx>
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
Reviewed-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001063917.3133475-2-lucas.demarchi@xxxxxxxxx
Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/i915_drv.c       |    3 +++
 drivers/gpu/drm/i915/i915_reg.h       |    3 +++
 drivers/gpu/drm/i915/intel_sideband.c |   15 +++++++++++++++
 drivers/gpu/drm/i915/intel_sideband.h |    2 ++
 4 files changed, 23 insertions(+)

--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -84,6 +84,7 @@
 #include "intel_gvt.h"
 #include "intel_memory_region.h"
 #include "intel_pm.h"
+#include "intel_sideband.h"
 #include "vlv_suspend.h"
 
 static struct drm_driver driver;
@@ -614,6 +615,8 @@ static int i915_driver_hw_probe(struct d
 	 */
 	intel_dram_detect(dev_priv);
 
+	intel_pcode_init(dev_priv);
+
 	intel_bw_init_hw(dev_priv);
 
 	return 0;
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9235,6 +9235,9 @@ enum {
 #define     GEN9_SAGV_DISABLE			0x0
 #define     GEN9_SAGV_IS_DISABLED		0x1
 #define     GEN9_SAGV_ENABLE			0x3
+#define   DG1_PCODE_STATUS			0x7E
+#define     DG1_UNCORE_GET_INIT_STATUS		0x0
+#define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
 #define GEN6_PCODE_DATA				_MMIO(0x138128)
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
--- a/drivers/gpu/drm/i915/intel_sideband.c
+++ b/drivers/gpu/drm/i915/intel_sideband.c
@@ -555,3 +555,18 @@ out:
 	return ret ? ret : status;
 #undef COND
 }
+
+void intel_pcode_init(struct drm_i915_private *i915)
+{
+	int ret;
+
+	if (!IS_DGFX(i915))
+		return;
+
+	ret = skl_pcode_request(i915, DG1_PCODE_STATUS,
+				DG1_UNCORE_GET_INIT_STATUS,
+				DG1_UNCORE_INIT_STATUS_COMPLETE,
+				DG1_UNCORE_INIT_STATUS_COMPLETE, 50);
+	if (ret)
+		drm_err(&i915->drm, "Pcode did not report uncore initialization completion!\n");
+}
--- a/drivers/gpu/drm/i915/intel_sideband.h
+++ b/drivers/gpu/drm/i915/intel_sideband.h
@@ -138,4 +138,6 @@ int sandybridge_pcode_write_timeout(stru
 int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
 		      u32 reply_mask, u32 reply, int timeout_base_ms);
 
+void intel_pcode_init(struct drm_i915_private *i915);
+
 #endif /* _INTEL_SIDEBAND_H */





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux