[PATCH 6.1 120/166] RDMA/mlx5: Fix affinity assignment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mark Bloch <mbloch@xxxxxxxxxx>

[ Upstream commit 617f5db1a626f18d5cbb7c7faf7bf8f9ea12be78 ]

The cited commit aimed to ensure that Virtual Functions (VFs) assign a
queue affinity to a Queue Pair (QP) to distribute traffic when
the LAG master creates a hardware LAG. If the affinity was set while
the hardware was not in LAG, the firmware would ignore the affinity value.

However, this commit unintentionally assigned an affinity to QPs on the LAG
master's VPORT even if the RDMA device was not marked as LAG-enabled.
In most cases, this was not an issue because when the hardware entered
hardware LAG configuration, the RDMA device of the LAG master would be
destroyed and a new one would be created, marked as LAG-enabled.

The problem arises when a user configures Equal-Cost Multipath (ECMP).
In ECMP mode, traffic can be directed to different physical ports based on
the queue affinity, which is intended for use by VPORTS other than the
E-Switch manager. ECMP mode is supported only if both E-Switch managers are
in switchdev mode and the appropriate route is configured via IP. In this
configuration, the RDMA device is not destroyed, and we retain the RDMA
device that is not marked as LAG-enabled.

To ensure correct behavior, Send Queues (SQs) opened by the E-Switch
manager through verbs should be assigned strict affinity. This means they
will only be able to communicate through the native physical port
associated with the E-Switch manager. This will prevent the firmware from
assigning affinity and will not allow the SQs to be remapped in case of
failover.

Fixes: 802dcc7fc5ec ("RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode")
Reviewed-by: Maor Gottlieb <maorg@xxxxxxxxxx>
Signed-off-by: Mark Bloch <mbloch@xxxxxxxxxx>
Link: https://lore.kernel.org/r/425b05f4da840bc684b0f7e8ebf61aeb5cef09b0.1685960567.git.leon@xxxxxxxxxx
Signed-off-by: Leon Romanovsky <leon@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/infiniband/hw/mlx5/mlx5_ib.h                |  3 +++
 drivers/infiniband/hw/mlx5/qp.c                     |  3 +++
 drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h | 12 ------------
 include/linux/mlx5/driver.h                         | 12 ++++++++++++
 4 files changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h
index 038522bb7113e..8d94e6834e01b 100644
--- a/drivers/infiniband/hw/mlx5/mlx5_ib.h
+++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h
@@ -1564,6 +1564,9 @@ static inline bool mlx5_ib_lag_should_assign_affinity(struct mlx5_ib_dev *dev)
 	    MLX5_CAP_PORT_SELECTION(dev->mdev, port_select_flow_table_bypass))
 		return 0;
 
+	if (mlx5_lag_is_lacp_owner(dev->mdev) && !dev->lag_active)
+		return 0;
+
 	return dev->lag_active ||
 		(MLX5_CAP_GEN(dev->mdev, num_lag_ports) > 1 &&
 		 MLX5_CAP_GEN(dev->mdev, lag_tx_port_affinity));
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index f7d3643b08f50..ac53ed79ca64c 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -1156,6 +1156,9 @@ static int create_raw_packet_qp_tis(struct mlx5_ib_dev *dev,
 
 	MLX5_SET(create_tis_in, in, uid, to_mpd(pd)->uid);
 	MLX5_SET(tisc, tisc, transport_domain, tdn);
+	if (!mlx5_ib_lag_should_assign_affinity(dev) &&
+	    mlx5_lag_is_lacp_owner(dev->mdev))
+		MLX5_SET(tisc, tisc, strict_lag_tx_port_affinity, 1);
 	if (qp->flags & IB_QP_CREATE_SOURCE_QPN)
 		MLX5_SET(tisc, tisc, underlay_qpn, qp->underlay_qpn);
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
index 1a35b3c2a3674..0b560e97a3563 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
@@ -275,18 +275,6 @@ static inline bool mlx5_sriov_is_enabled(struct mlx5_core_dev *dev)
 	return pci_num_vf(dev->pdev) ? true : false;
 }
 
-static inline int mlx5_lag_is_lacp_owner(struct mlx5_core_dev *dev)
-{
-	/* LACP owner conditions:
-	 * 1) Function is physical.
-	 * 2) LAG is supported by FW.
-	 * 3) LAG is managed by driver (currently the only option).
-	 */
-	return  MLX5_CAP_GEN(dev, vport_group_manager) &&
-		   (MLX5_CAP_GEN(dev, num_lag_ports) > 1) &&
-		    MLX5_CAP_GEN(dev, lag_master);
-}
-
 int mlx5_rescan_drivers_locked(struct mlx5_core_dev *dev);
 static inline int mlx5_rescan_drivers(struct mlx5_core_dev *dev)
 {
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index fff61e6d6d4de..3660ce6a93496 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -1230,6 +1230,18 @@ static inline u16 mlx5_core_max_vfs(const struct mlx5_core_dev *dev)
 	return dev->priv.sriov.max_vfs;
 }
 
+static inline int mlx5_lag_is_lacp_owner(struct mlx5_core_dev *dev)
+{
+	/* LACP owner conditions:
+	 * 1) Function is physical.
+	 * 2) LAG is supported by FW.
+	 * 3) LAG is managed by driver (currently the only option).
+	 */
+	return  MLX5_CAP_GEN(dev, vport_group_manager) &&
+		   (MLX5_CAP_GEN(dev, num_lag_ports) > 1) &&
+		    MLX5_CAP_GEN(dev, lag_master);
+}
+
 static inline int mlx5_get_gid_table_len(u16 param)
 {
 	if (param > 4) {
-- 
2.39.2






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux