The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x a82c3df955f8c1c726e4976527aa6ae924a67dd9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2023061848-unpleased-sizing-050f@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From a82c3df955f8c1c726e4976527aa6ae924a67dd9 Mon Sep 17 00:00:00 2001 From: Robert Hodaszi <robert.hodaszi@xxxxxxxx> Date: Fri, 9 Jun 2023 14:13:34 +0200 Subject: [PATCH] tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028A LS1028A is using DMA with LPUART. Having RX watermark set to 1, means DMA transactions are started only after receiving the second character. On other platforms with newer LPUART IP, Receiver Idle Empty function initiates the DMA request after the receiver is idling for 4 characters. But this feature is missing on LS1028A, which is causing a 1-character delay in the RX direction on this platform. Set RX watermark to 0 to initiate RX DMA after each character. Link: https://lore.kernel.org/linux-serial/20230607103459.1222426-1-robert.hodaszi@xxxxxxxx/ Fixes: 9ad9df844754 ("tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case") Cc: stable <stable@xxxxxxxxxx> Signed-off-by: Robert Hodaszi <robert.hodaszi@xxxxxxxx> Message-ID: <20230609121334.1878626-1-robert.hodaszi@xxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 7486a2b8556c..7fd30fcc10c6 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -310,7 +310,7 @@ static const struct lpuart_soc_data ls1021a_data = { static const struct lpuart_soc_data ls1028a_data = { .devtype = LS1028A_LPUART, .iotype = UPIO_MEM32, - .rx_watermark = 1, + .rx_watermark = 0, }; static struct lpuart_soc_data imx7ulp_data = {
