Patch "ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC" has been added to the 3.14-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC

to the 3.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm-mvebu-netgear-rn2120-use-hardware-bch-ecc.patch
and it can be found in the queue-3.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 500abb6ccb9e3f8d638a7f422443a8549245ef90 Mon Sep 17 00:00:00 2001
From: Arnaud Ebalard <arno@xxxxxxxxxxxx>
Date: Sat, 6 Sep 2014 22:49:38 +0200
Subject: ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC

From: Arnaud Ebalard <arno@xxxxxxxxxxxx>

commit 500abb6ccb9e3f8d638a7f422443a8549245ef90 upstream.

The bootloader on the Netgear ReadyNAS RN2120 uses Hardware BCH
ECC (strength = 4), while the pxa3xx NAND driver by default uses
Hamming ECC (strength = 1).

This patch changes the ECC mode on these machines to match that
of the bootloader and of the stock firmware. That way, it is
now possible to update the kernel from userland (e.g. using
standard tools from mtd-utils package); u-boot will happily
load and boot it.

The issue was initially reported and fixed by Ben Pedell for
RN102. The RN2120 shares the same Hynix H27U1G8F2BTR NAND
flash and setup. This patch is based on Ben's fix for RN102.

Fixes: ad51eddd95ad ("ARM: mvebu: Enable NAND controller in ReadyNAS 2120 .dts file")
Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>
Link: https://lkml.kernel.org/r/61f6a1b7ad0adc57a0e201b9680bc2e5f214a317.1410035142.git.arno@xxxxxxxxxxxx
Signed-off-by: Jason Cooper <jason@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 arch/arm/boot/dts/armada-xp-netgear-rn2120.dts |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -224,6 +224,10 @@
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
 
+				/* Use Hardware BCH ECC */
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
 				partition@0 {
 					label = "u-boot";
 					reg = <0x0000000 0x180000>;  /* 1.5MB */


Patches currently in stable-queue which might be from arno@xxxxxxxxxxxx are

queue-3.14/arm-mvebu-netgear-rn2120-use-hardware-bch-ecc.patch
queue-3.14/arm-mvebu-netgear-rn102-use-hardware-bch-ecc.patch
queue-3.14/arm-mvebu-netgear-rn104-use-hardware-bch-ecc.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]