From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> commit 3530167c6fe8001de6c026a3058eaca4c8a5329f upstream. Pass to dev_err_probe() PTR_ERR from actual dev_pm_opp_find_bw_floor() call which failed, instead of previous ret which at this point is 0. Failure of dev_pm_opp_find_bw_floor() would result in prematurely ending the probe with success. Fixes smatch warnings: drivers/soc/qcom/icc-bwmon.c:776 bwmon_probe() warn: passing zero to 'dev_err_probe' drivers/soc/qcom/icc-bwmon.c:781 bwmon_probe() warn: passing zero to 'dev_err_probe' Reported-by: kernel test robot <lkp@xxxxxxxxx> Reported-by: Dan Carpenter <error27@xxxxxxxxx> Link: https://lore.kernel.org/r/202305131657.76XeHDjF-lkp@xxxxxxxxx/ Cc: <stable@xxxxxxxxxxxxxxx> Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> Link: https://lore.kernel.org/r/20230513111747.132532-1-krzysztof.kozlowski@xxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/soc/qcom/icc-bwmon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/soc/qcom/icc-bwmon.c +++ b/drivers/soc/qcom/icc-bwmon.c @@ -603,12 +603,12 @@ static int bwmon_probe(struct platform_d bwmon->max_bw_kbps = UINT_MAX; opp = dev_pm_opp_find_bw_floor(dev, &bwmon->max_bw_kbps, 0); if (IS_ERR(opp)) - return dev_err_probe(dev, ret, "failed to find max peak bandwidth\n"); + return dev_err_probe(dev, PTR_ERR(opp), "failed to find max peak bandwidth\n"); bwmon->min_bw_kbps = 0; opp = dev_pm_opp_find_bw_ceil(dev, &bwmon->min_bw_kbps, 0); if (IS_ERR(opp)) - return dev_err_probe(dev, ret, "failed to find min peak bandwidth\n"); + return dev_err_probe(dev, PTR_ERR(opp), "failed to find min peak bandwidth\n"); bwmon->dev = dev;
