[PATCH] usb: dwc3: gadget: Properly initialize LINK TRB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On ISOC endpoints the last trb_pool entry used as a
LINK TRB is not getting zeroed out correctly due to
memset being called incorrectly and in the wrong place.
If pool allocated from DMA was not zero-initialized
to begin with this will result in the size and ctrl
values being random garbage. Call memset correctly after
assignment of the trb_link pointer.

Fixes: f6bafc6a1c ("usb: dwc3: convert TRBs into bitshifts")
Signed-off-by: Jack Pham <jackp@xxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
 drivers/usb/dwc3/gadget.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 3818b26..f231b51 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -525,12 +525,11 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 		if (!usb_endpoint_xfer_isoc(desc))
 			return 0;
 
-		memset(&trb_link, 0, sizeof(trb_link));
-
 		/* Link TRB for ISOC. The HWO bit is never reset */
 		trb_st_hw = &dep->trb_pool[0];
 
 		trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
+		memset(trb_link, 0, sizeof(*trb_link));
 
 		trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 		trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]