From: Hans de Goede <hdegoede@xxxxxxxxxx>
commit ad3d9c779b1f09f3f3a6fefd07af407c7bc7c9a7 upstream.
The bq25892 model relies on external charger-type detection and once
that is done the bq25890_charger code will update the input current
and if pumpexpress is used also the input voltage.
In this case, when the initial power_supply_changed() call is made
from the interrupt handler, the input settings are 5V/0.5A which
on many devices is not enough power to charge (while the device is on).
On many devices the fuel-gauge relies in its external_power_changed
callback to timely signal userspace about charging <-> discharging
status changes. Add a power_supply_changed() call after updating
the input current or voltage. This allows the fuel-gauge driver
to timely recheck if the battery is charging after the new input
settings have been applied and then it can immediately notify
userspace about this.
Fixes: 48f45b094dbb ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol")
Fixes: eab25b4f93aa ("power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection")
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/power/supply/bq25890_charger.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -675,6 +675,7 @@ static void bq25890_charger_external_pow
}
bq25890_field_write(bq, F_IINLIM, input_current_limit);
+ power_supply_changed(psy);
}
static int bq25890_get_chip_state(struct bq25890_device *bq,
@@ -973,6 +974,8 @@ static void bq25890_pump_express_work(st
dev_info(bq->dev, "Hi-voltage charging requested, input voltage is %d mV\n",
voltage);
+ power_supply_changed(bq->charger);
+
return;
error_print:
bq25890_field_write(bq, F_PUMPX_EN, 0);
