From: Ahmed Zaki <ahmed.zaki@xxxxxxxxx>
[ Upstream commit 7dcbdf29282fbcdb646dc785e8a57ed2c2fec8ba ]
When the user disables rxvlan offloading and then changes the number of
channels, all VLAN ports are unable to receive traffic.
Changing the number of channels triggers a VFR reset. During re-init, when
VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is received, we do:
1 - set the IAVF_FLAG_SETUP_NETDEV_FEATURES flag
2 - call
iavf_set_vlan_offload_features(adapter, 0, netdev->features);
The second step sends to the PF the __default__ features, in this case
aq_required |= IAVF_FLAG_AQ_ENABLE_CTAG_VLAN_STRIPPING
While the first step forces the watchdog task to call
netdev_update_features() -> iavf_set_features() ->
iavf_set_vlan_offload_features(adapter, netdev->features, features).
Since the user disabled the "rxvlan", this sets:
aq_required |= IAVF_FLAG_AQ_DISABLE_CTAG_VLAN_STRIPPING
When we start processing the AQ commands, both flags are enabled. Since we
process DISABLE_XTAG first then ENABLE_XTAG, this results in the PF
enabling the rxvlan offload. This breaks all communications on the VLAN
net devices.
Fix by removing the call to iavf_set_vlan_offload_features() (second
step). Calling netdev_update_features() from watchdog task is enough for
both init and reset paths.
Fixes: 7598f4b40bd6 ("iavf: Move netdev_update_features() into watchdog task")
Signed-off-by: Ahmed Zaki <ahmed.zaki@xxxxxxxxx>
Tested-by: Rafal Romanowski <rafal.romanowski@xxxxxxxxx>
Reviewed-by: Leon Romanovsky <leonro@xxxxxxxxxx>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/intel/iavf/iavf_virtchnl.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
index 9afbbdac35903..7c0578b5457b9 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
@@ -2238,11 +2238,6 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter,
iavf_process_config(adapter);
adapter->flags |= IAVF_FLAG_SETUP_NETDEV_FEATURES;
- /* Request VLAN offload settings */
- if (VLAN_V2_ALLOWED(adapter))
- iavf_set_vlan_offload_features(adapter, 0,
- netdev->features);
-
iavf_set_queue_vlan_tag_loc(adapter);
was_mac_changed = !ether_addr_equal(netdev->dev_addr,
--
2.39.2
