The patch below does not apply to the 6.3-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.3.y git checkout FETCH_HEAD git cherry-pick -x d461aac924b937bcb4fd0ca1242b3ef6868ecddd # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2023052230-sprout-playful-a41f@gregkh' --subject-prefix 'PATCH 6.3.y' HEAD^.. Possible dependencies: d461aac924b9 ("zsmalloc: move LRU update from zs_map_object() to zs_malloc()") 4c7ac97285d8 ("zsmalloc: fine-grained inuse ratio based fullness grouping") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From d461aac924b937bcb4fd0ca1242b3ef6868ecddd Mon Sep 17 00:00:00 2001 From: Nhat Pham <nphamcs@xxxxxxxxx> Date: Fri, 5 May 2023 11:50:54 -0700 Subject: [PATCH] zsmalloc: move LRU update from zs_map_object() to zs_malloc() Under memory pressure, we sometimes observe the following crash: [ 5694.832838] ------------[ cut here ]------------ [ 5694.842093] list_del corruption, ffff888014b6a448->next is LIST_POISON1 (dead000000000100) [ 5694.858677] WARNING: CPU: 33 PID: 418824 at lib/list_debug.c:47 __list_del_entry_valid+0x42/0x80 [ 5694.961820] CPU: 33 PID: 418824 Comm: fuse_counters.s Kdump: loaded Tainted: G S 5.19.0-0_fbk3_rc3_hoangnhatpzsdynshrv41_10870_g85a9558a25de #1 [ 5694.990194] Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM16 05/24/2021 [ 5695.007072] RIP: 0010:__list_del_entry_valid+0x42/0x80 [ 5695.017351] Code: 08 48 83 c2 22 48 39 d0 74 24 48 8b 10 48 39 f2 75 2c 48 8b 51 08 b0 01 48 39 f2 75 34 c3 48 c7 c7 55 d7 78 82 e8 4e 45 3b 00 <0f> 0b eb 31 48 c7 c7 27 a8 70 82 e8 3e 45 3b 00 0f 0b eb 21 48 c7 [ 5695.054919] RSP: 0018:ffffc90027aef4f0 EFLAGS: 00010246 [ 5695.065366] RAX: 41fe484987275300 RBX: ffff888008988180 RCX: 0000000000000000 [ 5695.079636] RDX: ffff88886006c280 RSI: ffff888860060480 RDI: ffff888860060480 [ 5695.093904] RBP: 0000000000000002 R08: 0000000000000000 R09: ffffc90027aef370 [ 5695.108175] R10: 0000000000000000 R11: ffffffff82fdf1c0 R12: 0000000010000002 [ 5695.122447] R13: ffff888014b6a448 R14: ffff888014b6a420 R15: 00000000138dc240 [ 5695.136717] FS: 00007f23a7d3f740(0000) GS:ffff888860040000(0000) knlGS:0000000000000000 [ 5695.152899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5695.164388] CR2: 0000560ceaab6ac0 CR3: 000000001c06c001 CR4: 00000000007706e0 [ 5695.178659] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5695.192927] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5695.207197] PKRU: 55555554 [ 5695.212602] Call Trace: [ 5695.217486] <TASK> [ 5695.221674] zs_map_object+0x91/0x270 [ 5695.229000] zswap_frontswap_store+0x33d/0x870 [ 5695.237885] ? do_raw_spin_lock+0x5d/0xa0 [ 5695.245899] __frontswap_store+0x51/0xb0 [ 5695.253742] swap_writepage+0x3c/0x60 [ 5695.261063] shrink_page_list+0x738/0x1230 [ 5695.269255] shrink_lruvec+0x5ec/0xcd0 [ 5695.276749] ? shrink_slab+0x187/0x5f0 [ 5695.284240] ? mem_cgroup_iter+0x6e/0x120 [ 5695.292255] shrink_node+0x293/0x7b0 [ 5695.299402] do_try_to_free_pages+0xea/0x550 [ 5695.307940] try_to_free_pages+0x19a/0x490 [ 5695.316126] __folio_alloc+0x19ff/0x3e40 [ 5695.323971] ? __filemap_get_folio+0x8a/0x4e0 [ 5695.332681] ? walk_component+0x2a8/0xb50 [ 5695.340697] ? generic_permission+0xda/0x2a0 [ 5695.349231] ? __filemap_get_folio+0x8a/0x4e0 [ 5695.357940] ? walk_component+0x2a8/0xb50 [ 5695.365955] vma_alloc_folio+0x10e/0x570 [ 5695.373796] ? walk_component+0x52/0xb50 [ 5695.381634] wp_page_copy+0x38c/0xc10 [ 5695.388953] ? filename_lookup+0x378/0xbc0 [ 5695.397140] handle_mm_fault+0x87f/0x1800 [ 5695.405157] do_user_addr_fault+0x1bd/0x570 [ 5695.413520] exc_page_fault+0x5d/0x110 [ 5695.421017] asm_exc_page_fault+0x22/0x30 After some investigation, I have found the following issue: unlike other zswap backends, zsmalloc performs the LRU list update at the object mapping time, rather than when the slot for the object is allocated. This deviation was discussed and agreed upon during the review process of the zsmalloc writeback patch series: https://lore.kernel.org/lkml/Y3flcAXNxxrvy3ZH@xxxxxxxxxxx/ Unfortunately, this introduces a subtle bug that occurs when there is a concurrent store and reclaim, which interleave as follows: zswap_frontswap_store() shrink_worker() zs_malloc() zs_zpool_shrink() spin_lock(&pool->lock) zs_reclaim_page() zspage = find_get_zspage() spin_unlock(&pool->lock) spin_lock(&pool->lock) zspage = list_first_entry(&pool->lru) list_del(&zspage->lru) zspage->lru.next = LIST_POISON1 zspage->lru.prev = LIST_POISON2 spin_unlock(&pool->lock) zs_map_object() spin_lock(&pool->lock) if (!list_empty(&zspage->lru)) list_del(&zspage->lru) CHECK_DATA_CORRUPTION(next == LIST_POISON1) /* BOOM */ With the current upstream code, this issue rarely happens. zswap only triggers writeback when the pool is already full, at which point all further store attempts are short-circuited. This creates an implicit pseudo-serialization between reclaim and store. I am working on a new zswap shrinking mechanism, which makes interleaving reclaim and store more likely, exposing this bug. zbud and z3fold do not have this problem, because they perform the LRU list update in the alloc function, while still holding the pool's lock. This patch fixes the aforementioned bug by moving the LRU update back to zs_malloc(), analogous to zbud and z3fold. Link: https://lkml.kernel.org/r/20230505185054.2417128-1-nphamcs@xxxxxxxxx Fixes: 64f768c6b32e ("zsmalloc: add a LRU to zs_pool to keep track of zspages in LRU order") Signed-off-by: Nhat Pham <nphamcs@xxxxxxxxx> Suggested-by: Johannes Weiner <hannes@xxxxxxxxxxx> Acked-by: Johannes Weiner <hannes@xxxxxxxxxxx> Reviewed-by: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx> Acked-by: Minchan Kim <minchan@xxxxxxxxxx> Cc: Dan Streetman <ddstreet@xxxxxxxx> Cc: Nitin Gupta <ngupta@xxxxxxxxxx> Cc: Seth Jennings <sjenning@xxxxxxxxxx> Cc: Vitaly Wool <vitaly.wool@xxxxxxxxxxxx> Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c index 44ddaf5d601e..02f7f414aade 100644 --- a/mm/zsmalloc.c +++ b/mm/zsmalloc.c @@ -1331,31 +1331,6 @@ void *zs_map_object(struct zs_pool *pool, unsigned long handle, obj_to_location(obj, &page, &obj_idx); zspage = get_zspage(page); -#ifdef CONFIG_ZPOOL - /* - * Move the zspage to front of pool's LRU. - * - * Note that this is swap-specific, so by definition there are no ongoing - * accesses to the memory while the page is swapped out that would make - * it "hot". A new entry is hot, then ages to the tail until it gets either - * written back or swaps back in. - * - * Furthermore, map is also called during writeback. We must not put an - * isolated page on the LRU mid-reclaim. - * - * As a result, only update the LRU when the page is mapped for write - * when it's first instantiated. - * - * This is a deviation from the other backends, which perform this update - * in the allocation function (zbud_alloc, z3fold_alloc). - */ - if (mm == ZS_MM_WO) { - if (!list_empty(&zspage->lru)) - list_del(&zspage->lru); - list_add(&zspage->lru, &pool->lru); - } -#endif - /* * migration cannot move any zpages in this zspage. Here, pool->lock * is too heavy since callers would take some time until they calls @@ -1525,9 +1500,8 @@ unsigned long zs_malloc(struct zs_pool *pool, size_t size, gfp_t gfp) fix_fullness_group(class, zspage); record_obj(handle, obj); class_stat_inc(class, ZS_OBJS_INUSE, 1); - spin_unlock(&pool->lock); - return handle; + goto out; } spin_unlock(&pool->lock); @@ -1550,6 +1524,14 @@ unsigned long zs_malloc(struct zs_pool *pool, size_t size, gfp_t gfp) /* We completely set up zspage so mark them as movable */ SetZsPageMovable(pool, zspage); +out: +#ifdef CONFIG_ZPOOL + /* Add/move zspage to beginning of LRU */ + if (!list_empty(&zspage->lru)) + list_del(&zspage->lru); + list_add(&zspage->lru, &pool->lru); +#endif + spin_unlock(&pool->lock); return handle;
