For IRQ controller INT_POLARITY regitser of Loongson-2K CPU
series, '0' indicates high level or rising edge triggered IRQ,
'1' indicates low level or falling edge triggered IRQ.
For Loongson-3A CPU series, setting INT_POLARITY register is not
supported and writting it has no effect.
So trigger polarity setting shouled be fixed for Loongson-2K CPU
series.
Fixes: 17343d0b4039 ("irqchip/loongson-liointc: Support to set IRQ type for ACPI path")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Chong Qiao <qiaochong@xxxxxxxxxxx>
Signed-off-by: Jianmin Lv <lvjianmin@xxxxxxxxxxx>
---
drivers/irqchip/irq-loongson-liointc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index 8d00a9ad5b00..9a9c2bf048a3 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -116,19 +116,19 @@ static int liointc_set_type(struct irq_data *data, unsigned int type)
switch (type) {
case IRQ_TYPE_LEVEL_HIGH:
liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
- liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+ liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
break;
case IRQ_TYPE_LEVEL_LOW:
liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
- liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+ liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
break;
case IRQ_TYPE_EDGE_RISING:
liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
- liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+ liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
break;
case IRQ_TYPE_EDGE_FALLING:
liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
- liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+ liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
break;
default:
irq_gc_unlock_irqrestore(gc, flags);
--
2.31.1
