On Tue, May 16, 2023 at 03:04:53PM +0200, Éric Brunet wrote: > Hello all, > > I have a HP Elite x360 1049 G9 2-in-1 notebook running fedora 38 with an Adler > Lake intel video card. > > After upgrading to kernel 6.2.13 (as packaged by fedora), I started seeing > severe video glitches made of random pixels in a vertical band occupying about > 20% of my screen, on the right. The glitches would happen both with X.org and > wayland. > > I checked that vanilla 6.2.12 does not have the bug and that both vanilla > 6.2.13 and vanilla 6.3.2 do have the bug. > > I bisected the problem to commit e2b789bc3dc34edc87ffb85634967d24ed351acb (it > is a one-liner reproduced at the end of this message). > > I checked that vanilla 6.3.2 with this commit reverted does not have the bug. > > I am CC-ing every e-mail appearing in this commit , I hope this is ok, and I > apologize if it is not. Please file a bug at https://gitlab.freedesktop.org/drm/intel/issues/new boot with "log_buf_len=4M drm.debug=0xe" passed to kernel cmdline, and attach the resulting dmesg to the bug. > > I have filled a fedora bug report about this, see https://bugzilla.redhat.com/ > show_bug.cgi?id=2203549 . You will find there a small video (made with fedora > kernel 2.6.14) demonstrating the issue. > > Some more details: > > % sudo lspci -vk -s 00:02.0 > 00:02.0 VGA compatible controller: Intel Corporation Alder Lake-UP3 GT2 [Iris > Xe Graphics] (rev 0c) (prog-if 00 [VGA controller]) > DeviceName: Onboard IGD > Subsystem: Hewlett-Packard Company Device 896d > Flags: bus master, fast devsel, latency 0, IRQ 143 > Memory at 603c000000 (64-bit, non-prefetchable) [size=16M] > Memory at 4000000000 (64-bit, prefetchable) [size=256M] > I/O ports at 3000 [size=64] > Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] > Capabilities: [40] Vendor Specific Information: Len=0c <?> > Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 > Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable+ 64bit- > Capabilities: [d0] Power Management version 2 > Capabilities: [100] Process Address Space ID (PASID) > Capabilities: [200] Address Translation Service (ATS) > Capabilities: [300] Page Request Interface (PRI) > Capabilities: [320] Single Root I/O Virtualization (SR-IOV) > Kernel driver in use: i915 > Kernel modules: i915 > > Relevant kernel boot messages: (appart from timestamps, these lines are > identical for 6.2.12 and 6.2.14): > > [ 2.790043] i915 0000:00:02.0: vgaarb: deactivate vga console > [ 2.790089] i915 0000:00:02.0: [drm] Using Transparent Hugepages > [ 2.790497] i915 0000:00:02.0: vgaarb: changed VGA decodes: > olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 2.793812] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/ > adlp_dmc_ver2_16.bin (v2.16) > [ 2.825058] i915 0000:00:02.0: [drm] GuC firmware i915/adlp_guc_70.bin > version 70.5.1 > [ 2.825061] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin version > 7.9.3 > [ 2.842906] i915 0000:00:02.0: [drm] HuC authenticated > [ 2.843778] i915 0000:00:02.0: [drm] GuC submission enabled > [ 2.843779] i915 0000:00:02.0: [drm] GuC SLPC enabled > [ 2.844200] i915 0000:00:02.0: [drm] GuC RC: enabled > [ 2.845010] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected > content support initialized > [ 3.964766] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor > 1 > [ 3.968403] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no > post: no) > [ 3.968981] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/ > PNP0A08:00/LNXVIDEO:00/input/input18 > [ 3.977892] fbcon: i915drmfb (fb0) is primary device > [ 3.977899] fbcon: Deferring console take-over > [ 3.977904] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device > [ 4.026120] i915 0000:00:02.0: [drm] Selective fetch area calculation > failed in pipe A > > Is there anything else I should provide? I am willing to run some tests, of > course. > > Thanks for your help, > > Éric Brunet > > ================================================= > > commit e2b789bc3dc34edc87ffb85634967d24ed351acb (HEAD) > Author: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > Date: Wed Mar 29 20:24:33 2023 +0300 > > drm/i915: Fix fast wake AUX sync len > > commit e1c71f8f918047ce822dc19b42ab1261ed259fd1 upstream. > > Fast wake should use 8 SYNC pulses for the preamble > and 10-16 SYNC pulses for the precharge. Reduce our > fast wake SYNC count to match the maximum value. > We also use the maximum precharge length for normal > AUX transactions. > > Cc: stable@xxxxxxxxxxxxxxx > Cc: Jouni Högander <jouni.hogander@xxxxxxxxx> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > Link: https://patchwork.freedesktop.org/patch/msgid/ > 20230329172434.18744-1-ville.syrjala@xxxxxxxxxxxxxxx > Reviewed-by: Jouni Högander <jouni.hogander@xxxxxxxxx> > (cherry picked from commit 605f7c73133341d4b762cbd9a22174cc22d4c38b) > Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx> > Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux.c b/drivers/gpu/drm/ > i915/display/intel_dp_aux.c > index 664bebdecea7..d5fed2eb66d2 100644 > --- a/drivers/gpu/drm/i915/display/intel_dp_aux.c > +++ b/drivers/gpu/drm/i915/display/intel_dp_aux.c > @@ -166,7 +166,7 @@ static u32 skl_get_aux_send_ctl(struct intel_dp *intel_dp, > DP_AUX_CH_CTL_TIME_OUT_MAX | > DP_AUX_CH_CTL_RECEIVE_ERROR | > (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | > - DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(32) | > + DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(24) | > DP_AUX_CH_CTL_SYNC_PULSE_SKL(32); > > if (intel_tc_port_in_tbt_alt_mode(dig_port)) > -- Ville Syrjälä Intel
