Re: Regression on drm/i915, with bisected commit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 16, 2023 at 03:04:53PM +0200, Éric Brunet wrote:
> Hello all,
> 
> I have a HP Elite x360 1049 G9 2-in-1 notebook running fedora 38 with an Adler 
> Lake intel video card.
> 
> After upgrading to kernel 6.2.13 (as packaged by fedora), I started seeing 
> severe video glitches made of random pixels in a vertical band occupying about 
> 20% of my screen, on the right. The glitches would happen both with X.org and 
> wayland.
> 
> I checked that vanilla 6.2.12 does not have the bug and that both vanilla 
> 6.2.13 and vanilla 6.3.2 do have the bug.
> 
> I bisected the problem to commit e2b789bc3dc34edc87ffb85634967d24ed351acb (it 
> is a one-liner reproduced at the end of this message).
> 
> I checked that vanilla 6.3.2 with this commit reverted does not have the bug.
> 

Can you also check that its mainline counterpart (e1c71f8f918047c) also
exhibits this regression?

> I am CC-ing every e-mail appearing in this commit , I hope this is ok, and I 
> apologize if it is not.
> 
> I have filled a fedora bug report about this, see https://bugzilla.redhat.com/
> show_bug.cgi?id=2203549 . You will find there a small video (made with fedora 
> kernel 2.6.14) demonstrating the issue.
> 
> Some more details:
> 
> % sudo lspci -vk -s 00:02.0
> 00:02.0 VGA compatible controller: Intel Corporation Alder Lake-UP3 GT2 [Iris 
> Xe Graphics] (rev 0c) (prog-if 00 [VGA controller])
>         DeviceName: Onboard IGD
>         Subsystem: Hewlett-Packard Company Device 896d
>         Flags: bus master, fast devsel, latency 0, IRQ 143
>         Memory at 603c000000 (64-bit, non-prefetchable) [size=16M]
>         Memory at 4000000000 (64-bit, prefetchable) [size=256M]
>         I/O ports at 3000 [size=64]
>         Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
>         Capabilities: [40] Vendor Specific Information: Len=0c <?>
>         Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
>         Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable+ 64bit-
>         Capabilities: [d0] Power Management version 2
>         Capabilities: [100] Process Address Space ID (PASID)
>         Capabilities: [200] Address Translation Service (ATS)
>         Capabilities: [300] Page Request Interface (PRI)
>         Capabilities: [320] Single Root I/O Virtualization (SR-IOV)
>         Kernel driver in use: i915
>         Kernel modules: i915
> 
> Relevant kernel boot messages: (appart from timestamps, these lines are 
> identical for 6.2.12 and 6.2.14):
> 
> [    2.790043] i915 0000:00:02.0: vgaarb: deactivate vga console
> [    2.790089] i915 0000:00:02.0: [drm] Using Transparent Hugepages
> [    2.790497] i915 0000:00:02.0: vgaarb: changed VGA decodes: 
> olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [    2.793812] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/
> adlp_dmc_ver2_16.bin (v2.16)
> [    2.825058] i915 0000:00:02.0: [drm] GuC firmware i915/adlp_guc_70.bin 
> version 70.5.1
> [    2.825061] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin version 
> 7.9.3
> [    2.842906] i915 0000:00:02.0: [drm] HuC authenticated
> [    2.843778] i915 0000:00:02.0: [drm] GuC submission enabled
> [    2.843779] i915 0000:00:02.0: [drm] GuC SLPC enabled
> [    2.844200] i915 0000:00:02.0: [drm] GuC RC: enabled
> [    2.845010] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected 
> content support initialized
> [    3.964766] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 
> 1
> [    3.968403] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  
> post: no)
> [    3.968981] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/
> PNP0A08:00/LNXVIDEO:00/input/input18
> [    3.977892] fbcon: i915drmfb (fb0) is primary device
> [    3.977899] fbcon: Deferring console take-over
> [    3.977904] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
> [    4.026120] i915 0000:00:02.0: [drm] Selective fetch area calculation 
> failed in pipe A
> 
> Is there anything else I should provide? I am willing to run some tests, of 
> course.
> 

Anyway, thanks for regression report. I'm adding it to regzbot:

#regzbot ^introduced: e2b789bc3dc34ed
#regzbot title: Selective fetch area calculation regression on Alder Lake card
#regzbot link: https://bugzilla.redhat.com/show_bug.cgi?id=2203549 

-- 
An old man doll... just what I always wanted! - Clara

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux