From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> commit 3eeca5e5f3100435b06a5b5d86daa3d135a8a4bd upstream. The adreno_load_gpu() path is guarded by an error check on adreno_load_fw(). This function is responsible for loading Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it does not take the vendor-signed ZAP blob into account. By embedding the SQE (and GMU, if necessary) firmware into the initrd/kernel, we can trigger and unfortunate path that would not bail out early and proceed with gpu->hw_init(). That will fail, as the ZAP loader path will not find the firmware and return back to adreno_load_gpu(). This error path involves pm_runtime_put_sync() which then calls idle() instead of suspend(). This is suboptimal, as it means that we're not going through the clean shutdown sequence. With at least A619_holi, this makes the GPU not wake up until it goes through at least one more start-fail-stop cycle. The pm_runtime_put_sync that appears in the error path actually does not guarantee that because of the earlier enabling of runtime autosuspend. Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown. Test cases: 1. All firmware baked into kernel 2. error loading ZAP fw in initrd -> load from rootfs at DE start Both succeed on A619_holi (SM6375) and A630 (SDM845). Fixes: 0d997f95b70f ("drm/msm/adreno: fix runtime PM imbalance at gpu load") Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx> Patchwork: https://patchwork.freedesktop.org/patch/530001/ Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@xxxxxxxxxx Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/gpu/drm/msm/adreno/adreno_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpu/drm/msm/adreno/adreno_device.c +++ b/drivers/gpu/drm/msm/adreno/adreno_device.c @@ -465,7 +465,7 @@ struct msm_gpu *adreno_load_gpu(struct d return gpu; err_put_rpm: - pm_runtime_put_sync(&pdev->dev); + pm_runtime_put_sync_suspend(&pdev->dev); err_disable_rpm: pm_runtime_disable(&pdev->dev);