From: Geetha sowjanya <gakula@xxxxxxxxxxx>
[ Upstream commit c222b292a3568754828ffd30338d2909b14ed160 ]
For each lmac port, MCS has two MCS_TOP_SLAVE_CHANNEL_CONFIGX
registers. For CN10KB both register need to be configured for the
port level mcs bypass to work. This patch also sets bitmap
of flowid/secy entry reserved for default bypass so that these
entries can be shown in debugfs.
Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Geetha sowjanya <gakula@xxxxxxxxxxx>
Signed-off-by: Sunil Goutham <sgoutham@xxxxxxxxxxx>
Reviewed-by: Leon Romanovsky <leonro@xxxxxxxxxx>
Signed-off-by: Paolo Abeni <pabeni@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/marvell/octeontx2/af/mcs.c | 11 ++++++++++-
.../net/ethernet/marvell/octeontx2/af/rvu_debugfs.c | 5 +++--
2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
index f68a6a0e3aa41..492baa0b594ce 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c
@@ -494,6 +494,9 @@ int mcs_install_flowid_bypass_entry(struct mcs *mcs)
/* Flow entry */
flow_id = mcs->hw->tcam_entries - MCS_RSRC_RSVD_CNT;
+ __set_bit(flow_id, mcs->rx.flow_ids.bmap);
+ __set_bit(flow_id, mcs->tx.flow_ids.bmap);
+
for (reg_id = 0; reg_id < 4; reg_id++) {
reg = MCSX_CPM_RX_SLAVE_FLOWID_TCAM_MASKX(reg_id, flow_id);
mcs_reg_write(mcs, reg, GENMASK_ULL(63, 0));
@@ -504,6 +507,8 @@ int mcs_install_flowid_bypass_entry(struct mcs *mcs)
}
/* secy */
secy_id = mcs->hw->secy_entries - MCS_RSRC_RSVD_CNT;
+ __set_bit(secy_id, mcs->rx.secy.bmap);
+ __set_bit(secy_id, mcs->tx.secy.bmap);
/* Set validate frames to NULL and enable control port */
plcy = 0x7ull;
@@ -528,6 +533,7 @@ int mcs_install_flowid_bypass_entry(struct mcs *mcs)
/* Enable Flowid entry */
mcs_ena_dis_flowid_entry(mcs, flow_id, MCS_RX, true);
mcs_ena_dis_flowid_entry(mcs, flow_id, MCS_TX, true);
+
return 0;
}
@@ -1325,8 +1331,11 @@ void mcs_reset_port(struct mcs *mcs, u8 port_id, u8 reset)
void mcs_set_lmac_mode(struct mcs *mcs, int lmac_id, u8 mode)
{
u64 reg;
+ int id = lmac_id * 2;
- reg = MCSX_MCS_TOP_SLAVE_CHANNEL_CFG(lmac_id * 2);
+ reg = MCSX_MCS_TOP_SLAVE_CHANNEL_CFG(id);
+ mcs_reg_write(mcs, reg, (u64)mode);
+ reg = MCSX_MCS_TOP_SLAVE_CHANNEL_CFG((id + 1));
mcs_reg_write(mcs, reg, (u64)mode);
}
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
index 26cfa501f1a11..9533b1d929604 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
@@ -497,8 +497,9 @@ static int rvu_dbg_mcs_rx_secy_stats_display(struct seq_file *filp, void *unused
stats.octet_validated_cnt);
seq_printf(filp, "secy%d: Pkts on disable port: %lld\n", secy_id,
stats.pkt_port_disabled_cnt);
- seq_printf(filp, "secy%d: Octets validated: %lld\n", secy_id, stats.pkt_badtag_cnt);
- seq_printf(filp, "secy%d: Octets validated: %lld\n", secy_id, stats.pkt_nosa_cnt);
+ seq_printf(filp, "secy%d: Pkts with badtag: %lld\n", secy_id, stats.pkt_badtag_cnt);
+ seq_printf(filp, "secy%d: Pkts with no SA(sectag.tci.c=0): %lld\n", secy_id,
+ stats.pkt_nosa_cnt);
seq_printf(filp, "secy%d: Pkts with nosaerror: %lld\n", secy_id,
stats.pkt_nosaerror_cnt);
seq_printf(filp, "secy%d: Tagged ctrl pkts: %lld\n", secy_id,
--
2.39.2
