[PATCH 6.1 238/239] spi: fsl-cpm: Use 16 bit mode for large transfers with even size

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>

commit fc96ec826bced75cc6b9c07a4ac44bbf651337ab upstream.

On CPM, the RISC core is a lot more efficiant when doing transfers
in 16-bits chunks than in 8-bits chunks, but unfortunately the
words need to be byte swapped as seen in a previous commit.

So, for large tranfers with an even size, allocate a temporary tx
buffer and byte-swap data before and after transfer.

This change allows setting higher speed for transfer. For instance
on an MPC 8xx (CPM1 comms RISC processor), the documentation tells
that transfer in byte mode at 1 kbit/s uses 0.200% of CPM load
at 25 MHz while a word transfer at the same speed uses 0.032%
of CPM load. This means the speed can be 6 times higher in
word mode for the same CPM load.

For the time being, only do it on CPM1 as there must be a
trade-off between the CPM load reduction and the CPU load required
to byte swap the data.

Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
Link: https://lore.kernel.org/r/f2e981f20f92dd28983c3949702a09248c23845c.1680371809.git.christophe.leroy@xxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/spi/spi-fsl-cpm.c |   23 +++++++++++++++++++++++
 drivers/spi/spi-fsl-spi.c |    3 +++
 2 files changed, 26 insertions(+)

--- a/drivers/spi/spi-fsl-cpm.c
+++ b/drivers/spi/spi-fsl-cpm.c
@@ -21,6 +21,7 @@
 #include <linux/spi/spi.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
+#include <linux/byteorder/generic.h>
 
 #include "spi-fsl-cpm.h"
 #include "spi-fsl-lib.h"
@@ -120,6 +121,21 @@ int fsl_spi_cpm_bufs(struct mpc8xxx_spi
 		mspi->rx_dma = mspi->dma_dummy_rx;
 		mspi->map_rx_dma = 0;
 	}
+	if (t->bits_per_word == 16 && t->tx_buf) {
+		const u16 *src = t->tx_buf;
+		u16 *dst;
+		int i;
+
+		dst = kmalloc(t->len, GFP_KERNEL);
+		if (!dst)
+			return -ENOMEM;
+
+		for (i = 0; i < t->len >> 1; i++)
+			dst[i] = cpu_to_le16p(src + i);
+
+		mspi->tx = dst;
+		mspi->map_tx_dma = 1;
+	}
 
 	if (mspi->map_tx_dma) {
 		void *nonconst_tx = (void *)mspi->tx; /* shut up gcc */
@@ -173,6 +189,13 @@ void fsl_spi_cpm_bufs_complete(struct mp
 	if (mspi->map_rx_dma)
 		dma_unmap_single(dev, mspi->rx_dma, t->len, DMA_FROM_DEVICE);
 	mspi->xfer_in_progress = NULL;
+
+	if (t->bits_per_word == 16 && t->rx_buf) {
+		int i;
+
+		for (i = 0; i < t->len; i += 2)
+			le16_to_cpus(t->rx_buf + i);
+	}
 }
 EXPORT_SYMBOL_GPL(fsl_spi_cpm_bufs_complete);
 
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -351,6 +351,9 @@ static int fsl_spi_prepare_message(struc
 				return -EINVAL;
 			if (t->bits_per_word == 16 || t->bits_per_word == 32)
 				t->bits_per_word = 8; /* pretend its 8 bits */
+			if (t->bits_per_word == 8 && t->len >= 256 &&
+			    (mpc8xxx_spi->flags & SPI_CPM1))
+				t->bits_per_word = 16;
 		}
 	}
 	return fsl_spi_setup_transfer(m->spi, first);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux