From: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> commit d46e04ccd40457a0119b76e11ab64a2ad403e138 upstream. Always run the entire init sequence (rtl8xxxu_init_device()) for RTL8192EU. It's what the vendor driver does too. This fixes a bug where the device is unable to connect after rebooting: wlp3s0f3u2: send auth to ... (try 1/3) wlp3s0f3u2: send auth to ... (try 2/3) wlp3s0f3u2: send auth to ... (try 3/3) wlp3s0f3u2: authentication with ... timed out Rebooting leaves the device powered on (partially? at least the firmware is still running), but not really in a working state. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> Acked-by: Jes Sorensen <jes@xxxxxxxxxxxxxxxxxx> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxx> Link: https://lore.kernel.org/r/4eb111a9-d4c4-37d0-b376-4e202de7153c@xxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c @@ -1710,6 +1710,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops = .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), .has_s0s1 = 0, .gen2_thermal_meter = 1, + .needs_full_init = 1, .adda_1t_init = 0x0fc01616, .adda_1t_path_on = 0x0fc01616, .adda_2t_path_on_a = 0x0fc01616,
