[PATCH] wifi: brcmfmac: Check for probe() id argument being NULL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The probe() id argument may be NULL in 2 scenarios:

1. brcmf_pcie_pm_leave_D3() calling brcmf_pcie_probe() to reprobe
   the device.

2. If a user tries to manually bind the driver from sysfs then the sdio /
   pcie / usb probe() function gets called with NULL as id argument.

1. Is being hit by users causing the following oops on resume and causing
wifi to stop working:

BUG: kernel NULL pointer dereference, address: 0000000000000018
<snip>
Hardware name: Dell Inc. XPS 13 9350/0PWNCR, BIDS 1.13.0 02/10/2020
Workgueue: events_unbound async_run_entry_fn
RIP: 0010:brcmf_pcie_probe+Ox16b/0x7a0 [brcmfmac]
<snip>
Call Trace:
 <TASK>
 brcmf_pcie_pm_leave_D3+0xc5/8x1a0 [brcmfmac be3b4cefca451e190fa35be8f00db1bbec293887]
 ? pci_pm_resume+0x5b/0xf0
 ? pci_legacy_resume+0x80/0x80
 dpm_run_callback+0x47/0x150
 device_resume+0xa2/0x1f0
 async_resume+0x1d/0x30
<snip>

Fix this by checking for id being NULL.

In the case of brcmf_pcie_probe() also add a manual lookup of the id
when it is NULL so that fwvid will still get set correctly on reprobe
on resume.

Fixes: da6d9c8ecd00 ("wifi: brcmfmac: add firmware vendor info in driver info")
Reported-by: Felix <nimrod4garoa@xxxxxxxxx>
Link: https://lore.kernel.org/regressions/4ef3f252ff530cbfa336f5a0d80710020fc5cb1e.camel@xxxxxxxxx/
Cc: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 2 +-
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c   | 8 +++++++-
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c    | 2 +-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 65d4799a5658..833524bc9b50 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -1067,7 +1067,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 	sdiodev->bus_if = bus_if;
 	bus_if->bus_priv.sdio = sdiodev;
 	bus_if->proto_type = BRCMF_PROTO_BCDC;
-	bus_if->fwvid = id->driver_data;
+	bus_if->fwvid = id ? id->driver_data : BRCMF_FWVENDOR_INVALID;
 	dev_set_drvdata(&func->dev, bus_if);
 	dev_set_drvdata(&sdiodev->func1->dev, bus_if);
 	sdiodev->dev = &sdiodev->func1->dev;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index a9b9b2dc62d4..b29ab19d695d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -2339,6 +2339,9 @@ static void brcmf_pcie_debugfs_create(struct device *dev)
 }
 #endif
 
+/* Forward declaration for pci_match_id() call */
+static const struct pci_device_id brcmf_pcie_devid_table[];
+
 static int
 brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
@@ -2351,6 +2354,9 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	brcmf_dbg(PCIE, "Enter %x:%x\n", pdev->vendor, pdev->device);
 
+	if (!id)
+		id = pci_match_id(brcmf_pcie_devid_table, pdev);
+
 	ret = -ENOMEM;
 	devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL);
 	if (devinfo == NULL)
@@ -2406,7 +2412,7 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	bus->bus_priv.pcie = pcie_bus_dev;
 	bus->ops = &brcmf_pcie_bus_ops;
 	bus->proto_type = BRCMF_PROTO_MSGBUF;
-	bus->fwvid = id->driver_data;
+	bus->fwvid = id ? id->driver_data : BRCMF_FWVENDOR_INVALID;
 	bus->chip = devinfo->coreid;
 	bus->wowl_supported = pci_pme_capable(pdev, PCI_D3hot);
 	dev_set_drvdata(&pdev->dev, bus);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index 246843aeb696..2541a47b1f8f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1425,7 +1425,7 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	else
 		brcmf_dbg(USB, "Broadcom full speed USB WLAN interface detected\n");
 
-	ret = brcmf_usb_probe_cb(devinfo, id->driver_info);
+	ret = brcmf_usb_probe_cb(devinfo, id ? id->driver_info : BRCMF_FWVENDOR_INVALID);
 	if (ret)
 		goto fail;
 
-- 
2.40.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux