From: Howard Hsu <howard-yh.hsu@xxxxxxxxxxxx>
[ Upstream commit 9c97df11dfe68b548a47744ba9fa6beddcfba2bc ]
If kernel do not enable CONFIG_HWMON, it may cause thermal
initialization to be done with temperature value 0 and then can not
transmit. This commit fixes it by setting trigger/restore temperature
before checking CONFIG_HWMON.
Fixes: 7d12b38ab6f6 ("wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work")
Signed-off-by: Howard Hsu <howard-yh.hsu@xxxxxxxxxxxx>
Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt7915/init.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index db0a35974ca7e..0d8bc7b06a46b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -204,6 +204,10 @@ static int mt7915_thermal_init(struct mt7915_phy *phy)
phy->cdev = cdev;
}
+ /* initialize critical/maximum high temperature */
+ phy->throttle_temp[MT7915_CRIT_TEMP_IDX] = MT7915_CRIT_TEMP;
+ phy->throttle_temp[MT7915_MAX_TEMP_IDX] = MT7915_MAX_TEMP;
+
if (!IS_REACHABLE(CONFIG_HWMON))
return 0;
@@ -212,10 +216,6 @@ static int mt7915_thermal_init(struct mt7915_phy *phy)
if (IS_ERR(hwmon))
return PTR_ERR(hwmon);
- /* initialize critical/maximum high temperature */
- phy->throttle_temp[MT7915_CRIT_TEMP_IDX] = MT7915_CRIT_TEMP;
- phy->throttle_temp[MT7915_MAX_TEMP_IDX] = MT7915_MAX_TEMP;
-
return 0;
}
--
2.39.2
