[PATCH 6.2 351/663] net: ethernet: stmmac: dwmac-rk: rework optional clock handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>

[ Upstream commit ea449f7fa0bf3fcd02e04a770b9ff707bf5e8f96 ]

The clock requesting code is quite repetitive. Fix this by requesting
the clocks via devm_clk_bulk_get_optional. The optional variant has been
used, since this is effectively what the old code did. The exact clocks
required depend on the platform and configuration. As a side effect
this change adds correct -EPROBE_DEFER handling.

Suggested-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Suggested-by: Andrew Lunn <andrew@xxxxxxx>
Fixes: 7ad269ea1a2b ("GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC")
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 .../net/ethernet/stmicro/stmmac/dwmac-rk.c    | 183 +++++++-----------
 1 file changed, 70 insertions(+), 113 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 6656d76b6766b..21954b3d825c6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -39,6 +39,24 @@ struct rk_gmac_ops {
 	u32 regs[];
 };
 
+static const char * const rk_clocks[] = {
+	"aclk_mac", "pclk_mac", "mac_clk_tx", "clk_mac_speed",
+};
+
+static const char * const rk_rmii_clocks[] = {
+	"mac_clk_rx", "clk_mac_ref", "clk_mac_refout",
+};
+
+enum rk_clocks_index {
+	RK_ACLK_MAC = 0,
+	RK_PCLK_MAC,
+	RK_MAC_CLK_TX,
+	RK_CLK_MAC_SPEED,
+	RK_MAC_CLK_RX,
+	RK_CLK_MAC_REF,
+	RK_CLK_MAC_REFOUT,
+};
+
 struct rk_priv_data {
 	struct platform_device *pdev;
 	phy_interface_t phy_iface;
@@ -51,15 +69,9 @@ struct rk_priv_data {
 	bool clock_input;
 	bool integrated_phy;
 
+	struct clk_bulk_data *clks;
+	int num_clks;
 	struct clk *clk_mac;
-	struct clk *gmac_clkin;
-	struct clk *mac_clk_rx;
-	struct clk *mac_clk_tx;
-	struct clk *clk_mac_ref;
-	struct clk *clk_mac_refout;
-	struct clk *clk_mac_speed;
-	struct clk *aclk_mac;
-	struct clk *pclk_mac;
 	struct clk *clk_phy;
 
 	struct reset_control *phy_reset;
@@ -104,10 +116,11 @@ static void px30_set_to_rmii(struct rk_priv_data *bsp_priv)
 
 static void px30_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
 {
+	struct clk *clk_mac_speed = bsp_priv->clks[RK_CLK_MAC_SPEED].clk;
 	struct device *dev = &bsp_priv->pdev->dev;
 	int ret;
 
-	if (IS_ERR(bsp_priv->clk_mac_speed)) {
+	if (!clk_mac_speed) {
 		dev_err(dev, "%s: Missing clk_mac_speed clock\n", __func__);
 		return;
 	}
@@ -116,7 +129,7 @@ static void px30_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
 		regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1,
 			     PX30_GMAC_SPEED_10M);
 
-		ret = clk_set_rate(bsp_priv->clk_mac_speed, 2500000);
+		ret = clk_set_rate(clk_mac_speed, 2500000);
 		if (ret)
 			dev_err(dev, "%s: set clk_mac_speed rate 2500000 failed: %d\n",
 				__func__, ret);
@@ -124,7 +137,7 @@ static void px30_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
 		regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1,
 			     PX30_GMAC_SPEED_100M);
 
-		ret = clk_set_rate(bsp_priv->clk_mac_speed, 25000000);
+		ret = clk_set_rate(clk_mac_speed, 25000000);
 		if (ret)
 			dev_err(dev, "%s: set clk_mac_speed rate 25000000 failed: %d\n",
 				__func__, ret);
@@ -1066,6 +1079,7 @@ static void rk3568_set_to_rmii(struct rk_priv_data *bsp_priv)
 
 static void rk3568_set_gmac_speed(struct rk_priv_data *bsp_priv, int speed)
 {
+	struct clk *clk_mac_speed = bsp_priv->clks[RK_CLK_MAC_SPEED].clk;
 	struct device *dev = &bsp_priv->pdev->dev;
 	unsigned long rate;
 	int ret;
@@ -1085,7 +1099,7 @@ static void rk3568_set_gmac_speed(struct rk_priv_data *bsp_priv, int speed)
 		return;
 	}
 
-	ret = clk_set_rate(bsp_priv->clk_mac_speed, rate);
+	ret = clk_set_rate(clk_mac_speed, rate);
 	if (ret)
 		dev_err(dev, "%s: set clk_mac_speed rate %ld failed %d\n",
 			__func__, rate, ret);
@@ -1371,6 +1385,7 @@ static void rv1126_set_to_rmii(struct rk_priv_data *bsp_priv)
 
 static void rv1126_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
 {
+	struct clk *clk_mac_speed = bsp_priv->clks[RK_CLK_MAC_SPEED].clk;
 	struct device *dev = &bsp_priv->pdev->dev;
 	unsigned long rate;
 	int ret;
@@ -1390,7 +1405,7 @@ static void rv1126_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
 		return;
 	}
 
-	ret = clk_set_rate(bsp_priv->clk_mac_speed, rate);
+	ret = clk_set_rate(clk_mac_speed, rate);
 	if (ret)
 		dev_err(dev, "%s: set clk_mac_speed rate %ld failed %d\n",
 			__func__, rate, ret);
@@ -1398,6 +1413,7 @@ static void rv1126_set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
 
 static void rv1126_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
 {
+	struct clk *clk_mac_speed = bsp_priv->clks[RK_CLK_MAC_SPEED].clk;
 	struct device *dev = &bsp_priv->pdev->dev;
 	unsigned long rate;
 	int ret;
@@ -1414,7 +1430,7 @@ static void rv1126_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
 		return;
 	}
 
-	ret = clk_set_rate(bsp_priv->clk_mac_speed, rate);
+	ret = clk_set_rate(clk_mac_speed, rate);
 	if (ret)
 		dev_err(dev, "%s: set clk_mac_speed rate %ld failed %d\n",
 			__func__, rate, ret);
@@ -1475,68 +1491,50 @@ static int rk_gmac_clk_init(struct plat_stmmacenet_data *plat)
 {
 	struct rk_priv_data *bsp_priv = plat->bsp_priv;
 	struct device *dev = &bsp_priv->pdev->dev;
-	int ret;
+	int phy_iface = bsp_priv->phy_iface;
+	int i, j, ret;
 
 	bsp_priv->clk_enabled = false;
 
-	bsp_priv->mac_clk_rx = devm_clk_get(dev, "mac_clk_rx");
-	if (IS_ERR(bsp_priv->mac_clk_rx))
-		dev_err(dev, "cannot get clock %s\n",
-			"mac_clk_rx");
-
-	bsp_priv->mac_clk_tx = devm_clk_get(dev, "mac_clk_tx");
-	if (IS_ERR(bsp_priv->mac_clk_tx))
-		dev_err(dev, "cannot get clock %s\n",
-			"mac_clk_tx");
+	bsp_priv->num_clks = ARRAY_SIZE(rk_clocks);
+	if (phy_iface == PHY_INTERFACE_MODE_RMII)
+		bsp_priv->num_clks += ARRAY_SIZE(rk_rmii_clocks);
 
-	bsp_priv->aclk_mac = devm_clk_get(dev, "aclk_mac");
-	if (IS_ERR(bsp_priv->aclk_mac))
-		dev_err(dev, "cannot get clock %s\n",
-			"aclk_mac");
+	bsp_priv->clks = devm_kcalloc(dev, bsp_priv->num_clks,
+				      sizeof(*bsp_priv->clks), GFP_KERNEL);
+	if (!bsp_priv->clks)
+		return -ENOMEM;
 
-	bsp_priv->pclk_mac = devm_clk_get(dev, "pclk_mac");
-	if (IS_ERR(bsp_priv->pclk_mac))
-		dev_err(dev, "cannot get clock %s\n",
-			"pclk_mac");
+	for (i = 0; i < ARRAY_SIZE(rk_clocks); i++)
+		bsp_priv->clks[i].id = rk_clocks[i];
 
-	bsp_priv->clk_mac = devm_clk_get(dev, "stmmaceth");
-	if (IS_ERR(bsp_priv->clk_mac))
-		dev_err(dev, "cannot get clock %s\n",
-			"stmmaceth");
-
-	if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII) {
-		bsp_priv->clk_mac_ref = devm_clk_get(dev, "clk_mac_ref");
-		if (IS_ERR(bsp_priv->clk_mac_ref))
-			dev_err(dev, "cannot get clock %s\n",
-				"clk_mac_ref");
-
-		if (!bsp_priv->clock_input) {
-			bsp_priv->clk_mac_refout =
-				devm_clk_get(dev, "clk_mac_refout");
-			if (IS_ERR(bsp_priv->clk_mac_refout))
-				dev_err(dev, "cannot get clock %s\n",
-					"clk_mac_refout");
-		}
+	if (phy_iface == PHY_INTERFACE_MODE_RMII) {
+		for (j = 0; j < ARRAY_SIZE(rk_rmii_clocks); j++)
+			bsp_priv->clks[i++].id = rk_rmii_clocks[j];
 	}
 
-	bsp_priv->clk_mac_speed = devm_clk_get(dev, "clk_mac_speed");
-	if (IS_ERR(bsp_priv->clk_mac_speed))
-		dev_err(dev, "cannot get clock %s\n", "clk_mac_speed");
+	ret = devm_clk_bulk_get_optional(dev, bsp_priv->num_clks,
+					 bsp_priv->clks);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get clocks\n");
+
+	/* "stmmaceth" will be enabled by the core */
+	bsp_priv->clk_mac = devm_clk_get(dev, "stmmaceth");
+	ret = PTR_ERR_OR_ZERO(bsp_priv->clk_mac);
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot get stmmaceth clock\n");
 
 	if (bsp_priv->clock_input) {
 		dev_info(dev, "clock input from PHY\n");
-	} else {
-		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
-			clk_set_rate(bsp_priv->clk_mac, 50000000);
+	} else if (phy_iface == PHY_INTERFACE_MODE_RMII) {
+		clk_set_rate(bsp_priv->clk_mac, 50000000);
 	}
 
 	if (plat->phy_node && bsp_priv->integrated_phy) {
 		bsp_priv->clk_phy = of_clk_get(plat->phy_node, 0);
-		if (IS_ERR(bsp_priv->clk_phy)) {
-			ret = PTR_ERR(bsp_priv->clk_phy);
-			dev_err(dev, "Cannot get PHY clock: %d\n", ret);
-			return -EINVAL;
-		}
+		ret = PTR_ERR_OR_ZERO(bsp_priv->clk_phy);
+		if (ret)
+			return dev_err_probe(dev, ret, "Cannot get PHY clock\n");
 		clk_set_rate(bsp_priv->clk_phy, 50000000);
 	}
 
@@ -1545,77 +1543,36 @@ static int rk_gmac_clk_init(struct plat_stmmacenet_data *plat)
 
 static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
 {
-	int phy_iface = bsp_priv->phy_iface;
+	int ret;
 
 	if (enable) {
 		if (!bsp_priv->clk_enabled) {
-			if (phy_iface == PHY_INTERFACE_MODE_RMII) {
-				if (!IS_ERR(bsp_priv->mac_clk_rx))
-					clk_prepare_enable(
-						bsp_priv->mac_clk_rx);
-
-				if (!IS_ERR(bsp_priv->clk_mac_ref))
-					clk_prepare_enable(
-						bsp_priv->clk_mac_ref);
-
-				if (!IS_ERR(bsp_priv->clk_mac_refout))
-					clk_prepare_enable(
-						bsp_priv->clk_mac_refout);
-			}
-
-			if (!IS_ERR(bsp_priv->clk_phy))
-				clk_prepare_enable(bsp_priv->clk_phy);
-
-			if (!IS_ERR(bsp_priv->aclk_mac))
-				clk_prepare_enable(bsp_priv->aclk_mac);
-
-			if (!IS_ERR(bsp_priv->pclk_mac))
-				clk_prepare_enable(bsp_priv->pclk_mac);
-
-			if (!IS_ERR(bsp_priv->mac_clk_tx))
-				clk_prepare_enable(bsp_priv->mac_clk_tx);
+			ret = clk_bulk_prepare_enable(bsp_priv->num_clks,
+						      bsp_priv->clks);
+			if (ret)
+				return ret;
 
-			if (!IS_ERR(bsp_priv->clk_mac_speed))
-				clk_prepare_enable(bsp_priv->clk_mac_speed);
+			ret = clk_prepare_enable(bsp_priv->clk_phy);
+			if (ret)
+				return ret;
 
 			if (bsp_priv->ops && bsp_priv->ops->set_clock_selection)
 				bsp_priv->ops->set_clock_selection(bsp_priv,
 					       bsp_priv->clock_input, true);
 
-			/**
-			 * if (!IS_ERR(bsp_priv->clk_mac))
-			 *	clk_prepare_enable(bsp_priv->clk_mac);
-			 */
 			mdelay(5);
 			bsp_priv->clk_enabled = true;
 		}
 	} else {
 		if (bsp_priv->clk_enabled) {
-			if (phy_iface == PHY_INTERFACE_MODE_RMII) {
-				clk_disable_unprepare(bsp_priv->mac_clk_rx);
-
-				clk_disable_unprepare(bsp_priv->clk_mac_ref);
-
-				clk_disable_unprepare(bsp_priv->clk_mac_refout);
-			}
-
+			clk_bulk_disable_unprepare(bsp_priv->num_clks,
+						   bsp_priv->clks);
 			clk_disable_unprepare(bsp_priv->clk_phy);
 
-			clk_disable_unprepare(bsp_priv->aclk_mac);
-
-			clk_disable_unprepare(bsp_priv->pclk_mac);
-
-			clk_disable_unprepare(bsp_priv->mac_clk_tx);
-
-			clk_disable_unprepare(bsp_priv->clk_mac_speed);
-
 			if (bsp_priv->ops && bsp_priv->ops->set_clock_selection)
 				bsp_priv->ops->set_clock_selection(bsp_priv,
 					      bsp_priv->clock_input, false);
-			/**
-			 * if (!IS_ERR(bsp_priv->clk_mac))
-			 *	clk_disable_unprepare(bsp_priv->clk_mac);
-			 */
+
 			bsp_priv->clk_enabled = false;
 		}
 	}
-- 
2.39.2






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux