From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> [ Upstream commit 6db9ed9a128cbae1423d043f3debd8bfa77783fd ] Some lines were broken very aggresively, presumably to fit under 80 chars and some places could have used a newline, particularly between subsequent nodes. Address all that and remove redundant comments near PCIe ranges while at it so as not to exceed 100 chars needlessly. Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> Link: https://lore.kernel.org/r/20230102094642.74254-5-konrad.dybcio@xxxxxxxxxx Stable-dep-of: 75a6e1fdb351 ("arm64: dts: qcom: ipq6018: Fix the PCI I/O port range") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -96,26 +96,31 @@ opp-microvolt = <725000>; clock-latency-ns = <200000>; }; + opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-microvolt = <787500>; clock-latency-ns = <200000>; }; + opp-1320000000 { opp-hz = /bits/ 64 <1320000000>; opp-microvolt = <862500>; clock-latency-ns = <200000>; }; + opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-microvolt = <925000>; clock-latency-ns = <200000>; }; + opp-1608000000 { opp-hz = /bits/ 64 <1608000000>; opp-microvolt = <987500>; clock-latency-ns = <200000>; }; + opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1062500>; @@ -131,8 +136,7 @@ pmuv8: pmu { compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; psci: psci { @@ -437,24 +441,18 @@ phys = <&pcie_phy0>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x20200000 0 0x20200000 - 0 0x10000>, /* downstream I/O */ - <0x82000000 0 0x20220000 0 0x20220000 - 0 0xfde0000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>, + <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 75 - IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 78 - IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 79 - IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 83 - IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, <&gcc GCC_PCIE0_AXI_M_CLK>,
