From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
commit 5a4e1b5aed2a36a10d6a3b30fafb6b3bf41c3186 upstream.
It the device is probed in non-zero ACPI D state, the module
identification is delayed until the first streamon.
The module identification has two parts: deviceID and version. To rea
the version we have to enable OTP read. This cannot be done during
streamon, becase it modifies REG_MODE_SELECT.
Since the driver has the same behaviour for all the module versions, do
not read the module version from the sensor's OTP.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 0e014f1a8d54 ("media: ov8856: support device probe in non-zero ACPI D state")
Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/media/i2c/ov8856.c | 40 ----------------------------------------
1 file changed, 40 deletions(-)
--- a/drivers/media/i2c/ov8856.c
+++ b/drivers/media/i2c/ov8856.c
@@ -1709,46 +1709,6 @@ static int ov8856_identify_module(struct
return -ENXIO;
}
- ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
- OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING);
- if (ret)
- return ret;
-
- ret = ov8856_write_reg(ov8856, OV8856_OTP_MODE_CTRL,
- OV8856_REG_VALUE_08BIT, OV8856_OTP_MODE_AUTO);
- if (ret) {
- dev_err(&client->dev, "failed to set otp mode");
- return ret;
- }
-
- ret = ov8856_write_reg(ov8856, OV8856_OTP_LOAD_CTRL,
- OV8856_REG_VALUE_08BIT,
- OV8856_OTP_LOAD_CTRL_ENABLE);
- if (ret) {
- dev_err(&client->dev, "failed to enable load control");
- return ret;
- }
-
- ret = ov8856_read_reg(ov8856, OV8856_MODULE_REVISION,
- OV8856_REG_VALUE_08BIT, &val);
- if (ret) {
- dev_err(&client->dev, "failed to read module revision");
- return ret;
- }
-
- dev_info(&client->dev, "OV8856 revision %x (%s) at address 0x%02x\n",
- val,
- val == OV8856_2A_MODULE ? "2A" :
- val == OV8856_1B_MODULE ? "1B" : "unknown revision",
- client->addr);
-
- ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
- OV8856_REG_VALUE_08BIT, OV8856_MODE_STANDBY);
- if (ret) {
- dev_err(&client->dev, "failed to exit streaming mode");
- return ret;
- }
-
ov8856->identified = true;
return 0;
