This is a note to let you know that I've just added the patch titled
serial: 8250: Add Quark X1000 to 8250_pci.c
to the 3.16-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-8250-add-quark-x1000-to-8250_pci.c.patch
and it can be found in the queue-3.16 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 1ede7dcca3c4fa15a518ab0473126f9c3e621e4c Mon Sep 17 00:00:00 2001
From: Bryan O'Donoghue <pure.logic@xxxxxxxxxxxxxxxxx>
Date: Tue, 23 Sep 2014 01:21:11 +0100
Subject: serial: 8250: Add Quark X1000 to 8250_pci.c
From: Bryan O'Donoghue <pure.logic@xxxxxxxxxxxxxxxxx>
commit 1ede7dcca3c4fa15a518ab0473126f9c3e621e4c upstream.
Quark X1000 contains two designware derived 8250 serial ports.
Each port has a unique PCI configuration space consisting of
BAR0:UART BAR1:DMA respectively.
Unlike the standard 8250 the register width is 32 bits for RHR,IER etc
The Quark UART has a fundamental clock @ 44.2368 MHz allowing for a
bitrate of up to about 2.76 megabits per second.
This patch enables standard 8250 mode
Signed-off-by: Bryan O'Donoghue <pure.logic@xxxxxxxxxxxxxxxxx>
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_pci.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1790,6 +1790,7 @@ pci_wch_ch353_setup(struct serial_privat
#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022
#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
#define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
+#define PCI_DEVICE_ID_INTEL_QRK_UART 0x0936
#define PCI_VENDOR_ID_SUNIX 0x1fd4
#define PCI_DEVICE_ID_SUNIX_1999 0x1999
@@ -1900,6 +1901,13 @@ static struct pci_serial_quirk pci_seria
.subdevice = PCI_ANY_ID,
.setup = byt_serial_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_QRK_UART,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_default_setup,
+ },
/*
* ITE
*/
@@ -2742,6 +2750,7 @@ enum pci_board_num_t {
pbn_ADDIDATA_PCIe_8_3906250,
pbn_ce4100_1_115200,
pbn_byt,
+ pbn_qrk,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
pbn_brcm_trumanage,
@@ -3492,6 +3501,12 @@ static struct pciserial_board pci_boards
.uart_offset = 0x80,
.reg_shift = 2,
},
+ [pbn_qrk] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 2764800,
+ .reg_shift = 2,
+ },
[pbn_omegapci] = {
.flags = FL_BASE0,
.num_ports = 8,
@@ -5194,6 +5209,12 @@ static struct pci_device_id serial_pci_t
pbn_byt },
/*
+ * Intel Quark x1000
+ */
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_qrk },
+ /*
* Cronyx Omega PCI
*/
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
Patches currently in stable-queue which might be from pure.logic@xxxxxxxxxxxxxxxxx are
queue-3.16/serial-8250-add-quark-x1000-to-8250_pci.c.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html