From: Kevin Groeneveld <kgroeneveld@xxxxxxxxxxxx> [ Upstream commit 87c614175bbf28d3fd076dc2d166bac759e41427 ] When using gpio based chip select the cs value can go outside the range 0 – 3. The various MX51_ECSPI_* macros did not take this into consideration resulting in possible corruption of the configuration. For example for any cs value over 3 the SCLKPHA bits would not be set and other values in the register possibly corrupted. One way to fix this is to just mask the cs bits to 2 bits. This still allows all 4 native chip selects to work as well as gpio chip selects (which can use any of the 4 chip select configurations). Signed-off-by: Kevin Groeneveld <kgroeneveld@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/20230318222132.3373-1-kgroeneveld@xxxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/spi/spi-imx.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index df18d07d544d5..e306de7009295 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -241,6 +241,18 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, return true; } +/* + * Note the number of natively supported chip selects for MX51 is 4. Some + * devices may have less actual SS pins but the register map supports 4. When + * using gpio chip selects the cs values passed into the macros below can go + * outside the range 0 - 3. We therefore need to limit the cs value to avoid + * corrupting bits outside the allocated locations. + * + * The simplest way to do this is to just mask the cs bits to 2 bits. This + * still allows all 4 native chip selects to work as well as gpio chip selects + * (which can use any of the 4 chip select configurations). + */ + #define MX51_ECSPI_CTRL 0x08 #define MX51_ECSPI_CTRL_ENABLE (1 << 0) #define MX51_ECSPI_CTRL_XCH (1 << 2) @@ -249,16 +261,16 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, #define MX51_ECSPI_CTRL_DRCTL(drctl) ((drctl) << 16) #define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8 #define MX51_ECSPI_CTRL_PREDIV_OFFSET 12 -#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18) +#define MX51_ECSPI_CTRL_CS(cs) ((cs & 3) << 18) #define MX51_ECSPI_CTRL_BL_OFFSET 20 #define MX51_ECSPI_CTRL_BL_MASK (0xfff << 20) #define MX51_ECSPI_CONFIG 0x0c -#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) -#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) -#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) -#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) -#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs) + 20)) +#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs & 3) + 0)) +#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs & 3) + 4)) +#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs & 3) + 8)) +#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs & 3) + 12)) +#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs & 3) + 20)) #define MX51_ECSPI_INT 0x10 #define MX51_ECSPI_INT_TEEN (1 << 0) -- 2.39.2
