diff --git a/Documentation/riscv/vm-layout.rst b/Documentation/riscv/vm-layout.rst
index b7f98930d38d..a2ec11da38b0 100644
--- a/Documentation/riscv/vm-layout.rst
+++ b/Documentation/riscv/vm-layout.rst
@@ -48,7 +48,7 @@ RISC-V Linux Kernel SV39
____________________________________________________________|___________________________________________________________
| | | |
ffffffc000000000 | -256 GB | ffffffc7ffffffff | 32 GB | kasan
- ffffffcefee00000 | -196 GB | ffffffcefeffffff | 2 MB | fixmap
+ ffffffcefea00000 | -196 GB | ffffffcefeffffff | 6 MB | fixmap
ffffffceff000000 | -196 GB | ffffffceffffffff | 16 MB | PCI io
ffffffcf00000000 | -196 GB | ffffffcfffffffff | 4 GB | vmemmap
ffffffd000000000 | -192 GB | ffffffdfffffffff | 64 GB | vmalloc/ioremap space
diff --git a/Makefile b/Makefile
index 610991822c20..781af18b5984 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 15
-SUBLEVEL = 109
+SUBLEVEL = 110
EXTRAVERSION =
NAME = Trick or Treat
diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
index 9b465cd55a8d..38a8095744a0 100644
--- a/arch/arm64/kvm/mmu.c
+++ b/arch/arm64/kvm/mmu.c
@@ -997,6 +997,20 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
return -EFAULT;
}
+ /*
+ * Permission faults just need to update the existing leaf entry,
+ * and so normally don't require allocations from the memcache. The
+ * only exception to this is when dirty logging is enabled at runtime
+ * and a write fault needs to collapse a block entry into a table.
+ */
+ if (fault_status != FSC_PERM ||
+ (logging_active && write_fault)) {
+ ret = kvm_mmu_topup_memory_cache(memcache,
+ kvm_mmu_cache_min_pages(kvm));
+ if (ret)
+ return ret;
+ }
+
/*
* Let's check if we will get back a huge page backed by hugetlbfs, or
* get block mapping for device MMIO region.
@@ -1051,36 +1065,17 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
fault_ipa &= ~(vma_pagesize - 1);
gfn = fault_ipa >> PAGE_SHIFT;
- mmap_read_unlock(current->mm);
-
- /*
- * Permission faults just need to update the existing leaf entry,
- * and so normally don't require allocations from the memcache. The
- * only exception to this is when dirty logging is enabled at runtime
- * and a write fault needs to collapse a block entry into a table.
- */
- if (fault_status != FSC_PERM || (logging_active && write_fault)) {
- ret = kvm_mmu_topup_memory_cache(memcache,
- kvm_mmu_cache_min_pages(kvm));
- if (ret)
- return ret;
- }
- mmu_seq = vcpu->kvm->mmu_notifier_seq;
/*
- * Ensure the read of mmu_notifier_seq happens before we call
- * gfn_to_pfn_prot (which calls get_user_pages), so that we don't risk
- * the page we just got a reference to gets unmapped before we have a
- * chance to grab the mmu_lock, which ensure that if the page gets
- * unmapped afterwards, the call to kvm_unmap_gfn will take it away
- * from us again properly. This smp_rmb() interacts with the smp_wmb()
- * in kvm_mmu_notifier_invalidate_<page|range_end>.
+ * Read mmu_notifier_seq so that KVM can detect if the results of
+ * vma_lookup() or __gfn_to_pfn_memslot() become stale prior to
+ * acquiring kvm->mmu_lock.
*
- * Besides, __gfn_to_pfn_memslot() instead of gfn_to_pfn_prot() is
- * used to avoid unnecessary overhead introduced to locate the memory
- * slot because it's always fixed even @gfn is adjusted for huge pages.
+ * Rely on mmap_read_unlock() for an implicit smp_rmb(), which pairs
+ * with the smp_wmb() in kvm_dec_notifier_count().
*/
- smp_rmb();
+ mmu_seq = vcpu->kvm->mmu_notifier_seq;
+ mmap_read_unlock(current->mm);
pfn = __gfn_to_pfn_memslot(memslot, gfn, false, NULL,
write_fault, &writable, NULL);
diff --git a/arch/arm64/kvm/psci.c b/arch/arm64/kvm/psci.c
index 44efe12dfc06..be03ea3e775a 100644
--- a/arch/arm64/kvm/psci.c
+++ b/arch/arm64/kvm/psci.c
@@ -508,6 +508,8 @@ int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
u64 val;
int wa_level;
+ if (KVM_REG_SIZE(reg->id) != sizeof(val))
+ return -ENOENT;
if (copy_from_user(&val, uaddr, KVM_REG_SIZE(reg->id)))
return -EFAULT;
diff --git a/arch/riscv/include/asm/fixmap.h b/arch/riscv/include/asm/fixmap.h
index 54cbf07fb4e9..8839cd2b28d1 100644
--- a/arch/riscv/include/asm/fixmap.h
+++ b/arch/riscv/include/asm/fixmap.h
@@ -22,6 +22,14 @@
*/
enum fixed_addresses {
FIX_HOLE,
+ /*
+ * The fdt fixmap mapping must be PMD aligned and will be mapped
+ * using PMD entries in fixmap_pmd in 64-bit and a PGD entry in 32-bit.
+ */
+ FIX_FDT_END,
+ FIX_FDT = FIX_FDT_END + FIX_FDT_SIZE / PAGE_SIZE - 1,
+
+ /* Below fixmaps will be mapped using fixmap_pte */
FIX_PTE,
FIX_PMD,
FIX_TEXT_POKE1,
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 39b550310ec6..397cb945b16e 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -66,9 +66,13 @@
#define FIXADDR_TOP PCI_IO_START
#ifdef CONFIG_64BIT
-#define FIXADDR_SIZE PMD_SIZE
+#define MAX_FDT_SIZE PMD_SIZE
+#define FIX_FDT_SIZE (MAX_FDT_SIZE + SZ_2M)
+#define FIXADDR_SIZE (PMD_SIZE + FIX_FDT_SIZE)
#else
-#define FIXADDR_SIZE PGDIR_SIZE
+#define MAX_FDT_SIZE PGDIR_SIZE
+#define FIX_FDT_SIZE MAX_FDT_SIZE
+#define FIXADDR_SIZE (PGDIR_SIZE + FIX_FDT_SIZE)
#endif
#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 14b84d09354a..8cc147491c67 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -286,12 +286,8 @@ void __init setup_arch(char **cmdline_p)
#if IS_ENABLED(CONFIG_BUILTIN_DTB)
unflatten_and_copy_device_tree();
#else
- if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
- unflatten_device_tree();
- else
- pr_err("No DTB found in kernel mappings\n");
+ unflatten_device_tree();
#endif
- early_init_fdt_scan_reserved_mem();
misc_mem_init();
init_resources();
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 830f53b141a0..e800d7981e99 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -49,7 +49,6 @@ unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]
EXPORT_SYMBOL(empty_zero_page);
extern char _start[];
-#define DTB_EARLY_BASE_VA PGDIR_SIZE
void *_dtb_early_va __initdata;
uintptr_t _dtb_early_pa __initdata;
@@ -216,31 +215,22 @@ static void __init setup_bootmem(void)
set_max_mapnr(max_low_pfn - ARCH_PFN_OFFSET);
reserve_initrd_mem();
+
+ /*
+ * No allocation should be done before reserving the memory as defined
+ * in the device tree, otherwise the allocation could end up in a
+ * reserved region.
+ */
+ early_init_fdt_scan_reserved_mem();
+
/*
* If DTB is built in, no need to reserve its memblock.
* Otherwise, do reserve it but avoid using
* early_init_fdt_reserve_self() since __pa() does
* not work for DTB pointers that are fixmap addresses
*/
- if (!IS_ENABLED(CONFIG_BUILTIN_DTB)) {
- /*
- * In case the DTB is not located in a memory region we won't
- * be able to locate it later on via the linear mapping and
- * get a segfault when accessing it via __va(dtb_early_pa).
- * To avoid this situation copy DTB to a memory region.
- * Note that memblock_phys_alloc will also reserve DTB region.
- */
- if (!memblock_is_memory(dtb_early_pa)) {
- size_t fdt_size = fdt_totalsize(dtb_early_va);
- phys_addr_t new_dtb_early_pa = memblock_phys_alloc(fdt_size, PAGE_SIZE);
- void *new_dtb_early_va = early_memremap(new_dtb_early_pa, fdt_size);
-
- memcpy(new_dtb_early_va, dtb_early_va, fdt_size);
- early_memunmap(new_dtb_early_va, fdt_size);
- _dtb_early_pa = new_dtb_early_pa;
- } else
- memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
- }
+ if (!IS_ENABLED(CONFIG_BUILTIN_DTB))
+ memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
dma_contiguous_reserve(dma32_phys_limit);
if (IS_ENABLED(CONFIG_64BIT))
@@ -265,7 +255,6 @@ pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
static pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
-static pmd_t __maybe_unused early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
#ifdef CONFIG_XIP_KERNEL
#define riscv_pfn_base (*(unsigned long *)XIP_FIXUP(&riscv_pfn_base))
@@ -580,24 +569,28 @@ static void __init create_kernel_page_table(pgd_t *pgdir, bool early)
* this means 2 PMD entries whereas for 32-bit kernel, this is only 1 PGDIR
* entry.
*/
-static void __init create_fdt_early_page_table(pgd_t *pgdir, uintptr_t dtb_pa)
+static void __init create_fdt_early_page_table(pgd_t *pgdir,
+ uintptr_t fix_fdt_va,
+ uintptr_t dtb_pa)
{
-#ifndef CONFIG_BUILTIN_DTB
uintptr_t pa = dtb_pa & ~(PMD_SIZE - 1);
- create_pgd_mapping(early_pg_dir, DTB_EARLY_BASE_VA,
- IS_ENABLED(CONFIG_64BIT) ? (uintptr_t)early_dtb_pmd : pa,
- PGDIR_SIZE,
- IS_ENABLED(CONFIG_64BIT) ? PAGE_TABLE : PAGE_KERNEL);
+#ifndef CONFIG_BUILTIN_DTB
+ /* Make sure the fdt fixmap address is always aligned on PMD size */
+ BUILD_BUG_ON(FIX_FDT % (PMD_SIZE / PAGE_SIZE));
- if (IS_ENABLED(CONFIG_64BIT)) {
- create_pmd_mapping(early_dtb_pmd, DTB_EARLY_BASE_VA,
+ /* In 32-bit only, the fdt lies in its own PGD */
+ if (!IS_ENABLED(CONFIG_64BIT)) {
+ create_pgd_mapping(early_pg_dir, fix_fdt_va,
+ pa, MAX_FDT_SIZE, PAGE_KERNEL);
+ } else {
+ create_pmd_mapping(fixmap_pmd, fix_fdt_va,
pa, PMD_SIZE, PAGE_KERNEL);
- create_pmd_mapping(early_dtb_pmd, DTB_EARLY_BASE_VA + PMD_SIZE,
+ create_pmd_mapping(fixmap_pmd, fix_fdt_va + PMD_SIZE,
pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
}
- dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1));
+ dtb_early_va = (void *)fix_fdt_va + (dtb_pa & (PMD_SIZE - 1));
#else
/*
* For 64-bit kernel, __va can't be used since it would return a linear
@@ -685,7 +678,8 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
create_kernel_page_table(early_pg_dir, true);
/* Setup early mapping for FDT early scan */
- create_fdt_early_page_table(early_pg_dir, dtb_pa);
+ create_fdt_early_page_table(early_pg_dir,
+ __fix_to_virt(FIX_FDT), dtb_pa);
/*
* Bootime fixmap only can handle PMD_SIZE mapping. Thus, boot-ioremap
@@ -735,6 +729,16 @@ static void __init setup_vm_final(void)
pt_ops.get_pmd_virt = get_pmd_virt_fixmap;
#endif
/* Setup swapper PGD for fixmap */
+#if !defined(CONFIG_64BIT)
+ /*
+ * In 32-bit, the device tree lies in a pgd entry, so it must be copied
+ * directly in swapper_pg_dir in addition to the pgd entry that points
+ * to fixmap_pte.
+ */
+ unsigned long idx = pgd_index(__fix_to_virt(FIX_FDT));
+
+ set_pgd(&swapper_pg_dir[idx], early_pg_dir[idx]);
+#endif
create_pgd_mapping(swapper_pg_dir, FIXADDR_START,
__pa_symbol(fixmap_pgd_next),
PGDIR_SIZE, PAGE_TABLE);
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 9cbf086fe552..ab0b2eb5fa07 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -690,7 +690,12 @@ static int really_probe_debug(struct device *dev, struct device_driver *drv)
calltime = ktime_get();
ret = really_probe(dev, drv);
rettime = ktime_get();
- pr_debug("probe of %s returned %d after %lld usecs\n",
+ /*
+ * Don't change this to pr_debug() because that requires
+ * CONFIG_DYNAMIC_DEBUG and we want a simple 'initcall_debug' on the
+ * kernel commandline to print this all the time at the debug level.
+ */
+ printk(KERN_DEBUG "probe of %s returned %d after %lld usecs\n",
dev_name(dev), ret, ktime_us_delta(rettime, calltime));
return ret;
}
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index ed589e7182bb..3d9c0444df40 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -1327,6 +1327,9 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
return -EINVAL;
}
+ var->xres_virtual = fb->width;
+ var->yres_virtual = fb->height;
+
/*
* Workaround for SDL 1.2, which is known to be setting all pixel format
* fields values to zero in some cases. We treat this situation as a
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index fc622e6b329a..cba909c5bc6b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -5890,6 +5890,11 @@ static s32 brcmf_get_assoc_ies(struct brcmf_cfg80211_info *cfg,
(struct brcmf_cfg80211_assoc_ielen_le *)cfg->extra_buf;
req_len = le32_to_cpu(assoc_info->req_len);
resp_len = le32_to_cpu(assoc_info->resp_len);
+ if (req_len > WL_EXTRA_BUF_MAX || resp_len > WL_EXTRA_BUF_MAX) {
+ bphy_err(drvr, "invalid lengths in assoc info: req %u resp %u\n",
+ req_len, resp_len);
+ return -EINVAL;
+ }
if (req_len) {
err = brcmf_fil_iovar_data_get(ifp, "assoc_req_ies",
cfg->extra_buf,
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 649df298869c..4aa2e655398c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1140,9 +1140,6 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
if (need_restore)
pci_restore_bars(dev);
- if (dev->bus->self)
- pcie_aspm_pm_state_change(dev->bus->self);
-
return 0;
}
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 72280e9b23b2..e6ea6e950428 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -595,12 +595,10 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
#ifdef CONFIG_PCIEASPM
void pcie_aspm_init_link_state(struct pci_dev *pdev);
void pcie_aspm_exit_link_state(struct pci_dev *pdev);
-void pcie_aspm_pm_state_change(struct pci_dev *pdev);
void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
#else
static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
-static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
#endif
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 013a47f587ce..b3ad316418f1 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1020,25 +1020,6 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
up_read(&pci_bus_sem);
}
-/* @pdev: the root port or switch downstream port */
-void pcie_aspm_pm_state_change(struct pci_dev *pdev)
-{
- struct pcie_link_state *link = pdev->link_state;
-
- if (aspm_disabled || !link)
- return;
- /*
- * Devices changed PM state, we should recheck if latency
- * meets all functions' requirement
- */
- down_read(&pci_bus_sem);
- mutex_lock(&aspm_lock);
- pcie_update_aspm_capable(link->root);
- pcie_config_aspm_path(link);
- mutex_unlock(&aspm_lock);
- up_read(&pci_bus_sem);
-}
-
void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
{
struct pcie_link_state *link = pdev->link_state;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index fc12fee66141..f05aea57e2d8 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -595,6 +595,11 @@ static void option_instat_callback(struct urb *urb);
#define SIERRA_VENDOR_ID 0x1199
#define SIERRA_PRODUCT_EM9191 0x90d3
+/* UNISOC (Spreadtrum) products */
+#define UNISOC_VENDOR_ID 0x1782
+/* TOZED LT70-C based on UNISOC SL8563 uses UNISOC's vendor ID */
+#define TOZED_PRODUCT_LT70C 0x4055
+
/* Device flags */
/* Highest interface number which can be used with NCTRL() and RSVD() */
@@ -2225,6 +2230,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 3f92a21cabe8..7905e005baa9 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -996,7 +996,14 @@ static int hci_sock_ioctl(struct socket *sock, unsigned int cmd,
if (hci_sock_gen_cookie(sk)) {
struct sk_buff *skb;
- if (capable(CAP_NET_ADMIN))
+ /* Perform careful checks before setting the HCI_SOCK_TRUSTED
+ * flag. Make sure that not only the current task but also
+ * the socket opener has the required capability, since
+ * privileged programs can be tricked into making ioctl calls
+ * on HCI sockets, and the socket should not be marked as
+ * trusted simply because the ioctl caller is privileged.
+ */
+ if (sk_capable(sk, CAP_NET_ADMIN))
hci_sock_set_flag(sk, HCI_SOCK_TRUSTED);
/* Send event to monitor */
diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh
index cc9c846585f0..a9ba782d8ca0 100644
--- a/tools/testing/selftests/kselftest/runner.sh
+++ b/tools/testing/selftests/kselftest/runner.sh
@@ -33,9 +33,9 @@ tap_timeout()
{
# Make sure tests will time out if utility is available.
if [ -x /usr/bin/timeout ] ; then
- /usr/bin/timeout --foreground "$kselftest_timeout" "$1"
+ /usr/bin/timeout --foreground "$kselftest_timeout" $1
else
- "$1"
+ $1
fi
}
@@ -65,17 +65,25 @@ run_one()
TEST_HDR_MSG="selftests: $DIR: $BASENAME_TEST"
echo "# $TEST_HDR_MSG"
- if [ ! -x "$TEST" ]; then
- echo -n "# Warning: file $TEST is "
- if [ ! -e "$TEST" ]; then
- echo "missing!"
- else
- echo "not executable, correct this."
- fi
+ if [ ! -e "$TEST" ]; then
+ echo "# Warning: file $TEST is missing!"
echo "not ok $test_num $TEST_HDR_MSG"
else
+ cmd="./$BASENAME_TEST"
+ if [ ! -x "$TEST" ]; then
+ echo "# Warning: file $TEST is not executable"
+
+ if [ $(head -n 1 "$TEST" | cut -c -2) = "#!" ]
+ then
+ interpreter=$(head -n 1 "$TEST" | cut -c 3-)
+ cmd="$interpreter ./$BASENAME_TEST"
+ else
+ echo "not ok $test_num $TEST_HDR_MSG"
+ return
+ fi
+ fi
cd `dirname $TEST` > /dev/null
- ((((( tap_timeout ./$BASENAME_TEST 2>&1; echo $? >&3) |
+ ((((( tap_timeout "$cmd" 2>&1; echo $? >&3) |
tap_prefix >&4) 3>&1) |
(read xs; exit $xs)) 4>>"$logfile" &&
echo "ok $test_num $TEST_HDR_MSG") ||
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 3be615ab1588..96a090e7f47e 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -732,7 +732,7 @@ chk_add_nr()
local dump_stats
printf "%-39s %s" " " "add"
- count=`ip netns exec $ns2 nstat -as | grep MPTcpExtAddAddr | awk '{print $2}'`
+ count=`ip netns exec $ns2 nstat -as MPTcpExtAddAddr | grep MPTcpExtAddAddr | awk '{print $2}'`
[ -z "$count" ] && count=0
if [ "$count" != "$add_nr" ]; then
echo "[fail] got $count ADD_ADDR[s] expected $add_nr"
