Re: [PATCH fixes v2] mfd: max77693: Fix always masked MUIC interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/10/2014 07:48 PM, Krzysztof Kozlowski wrote:
> All interrupts coming from MUIC were ignored because interrupt source
> register was masked.
> 
> The Maxim 77693 has a "interrupt source" - a separate register and interrupts
> which give information about PMIC block triggering the individual
> interrupt (charger, topsys, MUIC, flash LED).
> 
> By default bootloader could initialize this register to "mask all"
> value. In such case (observed on Trats2 board) MUIC interrupts won't be
> generated regardless of their mask status. Regmap irq chip was unmasking
> individual MUIC interrupts but the source was masked
> 
> Before introducing regmap irq chip this interrupt source was unmasked,
> read and acked. Reading and acking is not necessary but unmasking is.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> Cc: <stable@xxxxxxxxxxxxxxx>
> Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap")
> 
> ---
> 
> Changes since v1:
> 1. Do the unmasking in main MFD driver. Additionally unmask all
>    interrupts, not only MUIC. Suggested by Chanwoo Choi.
> ---
>  drivers/mfd/max77693.c               | 12 ++++++++++++
>  include/linux/mfd/max77693-private.h |  7 +++++++
>  2 files changed, 19 insertions(+)
> 
> diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
> index 4b54da1ff7ab..4e4e6a1a6301 100644
> --- a/drivers/mfd/max77693.c
> +++ b/drivers/mfd/max77693.c
> @@ -253,6 +253,17 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
>  		goto err_irq_muic;
>  	}
>  
> +	/* Unmask interrupts from all blocks in interrupt source register */
> +	ret = regmap_update_bits(max77693->regmap,
> +				MAX77693_PMIC_REG_INTSRC_MASK,
> +				SRC_IRQ_ALL, ~SRC_IRQ_ALL);
> +	if (ret < 0) {
> +		dev_err(max77693->dev,
> +			"Could not unmask interrupts in INTSRC: %d\n",
> +			ret);
> +		goto err_intsrc;
> +	}
> +
>  	pm_runtime_set_active(max77693->dev);
>  
>  	ret = mfd_add_devices(max77693->dev, -1, max77693_devs,
> @@ -264,6 +275,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
>  
>  err_mfd:
>  	mfd_remove_devices(max77693->dev);
> +err_intsrc:
>  	regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
>  err_irq_muic:
>  	regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger);
> diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
> index e1b2b61285b9..15fed5365a20 100644
> --- a/include/linux/mfd/max77693-private.h
> +++ b/include/linux/mfd/max77693-private.h
> @@ -438,6 +438,13 @@ enum max77693_irq_source {
>  	MAX77693_IRQ_GROUP_NR,
>  };
>  
> +#define SRC_IRQ_CHARGER			BIT(0)
> +#define SRC_IRQ_TOP			BIT(1)
> +#define SRC_IRQ_FLASH			BIT(2)
> +#define SRC_IRQ_MUIC			BIT(3)
> +#define SRC_IRQ_ALL			(SRC_IRQ_CHARGER | SRC_IRQ_TOP \
> +						| SRC_IRQ_FLASH | SRC_IRQ_MUIC)
> +
>  #define LED_IRQ_FLED2_OPEN		BIT(0)
>  #define LED_IRQ_FLED2_SHORT		BIT(1)
>  #define LED_IRQ_FLED1_OPEN		BIT(2)
> 

Reviewed-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>

Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]