From: Sebastian Basierski <sebastianx.basierski@xxxxxxxxx>
[ Upstream commit 67d47b95119ad589b0a0b16b88b1dd9a04061ced ]
While using i219-LM card currently it was only possible to achieve
about 60% of maximum speed due to regression introduced in Linux 5.8.
This was caused by TSO not being disabled by default despite commit
f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround").
Fix that by disabling TSO during driver probe.
Fixes: f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround")
Signed-off-by: Sebastian Basierski <sebastianx.basierski@xxxxxxxxx>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@xxxxxxxxx>
Tested-by: Naama Meir <naamax.meir@xxxxxxxxxxxxxxx>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
Reviewed-by: Simon Horman <simon.horman@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230417205345.1030801-1-anthony.l.nguyen@xxxxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 51 +++++++++++-----------
1 file changed, 26 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index b0d43985724d8..2c34d45354fe9 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5270,31 +5270,6 @@ static void e1000_watchdog_task(struct work_struct *work)
ew32(TARC(0), tarc0);
}
- /* disable TSO for pcie and 10/100 speeds, to avoid
- * some hardware issues
- */
- if (!(adapter->flags & FLAG_TSO_FORCE)) {
- switch (adapter->link_speed) {
- case SPEED_10:
- case SPEED_100:
- e_info("10/100 speed: disabling TSO\n");
- netdev->features &= ~NETIF_F_TSO;
- netdev->features &= ~NETIF_F_TSO6;
- break;
- case SPEED_1000:
- netdev->features |= NETIF_F_TSO;
- netdev->features |= NETIF_F_TSO6;
- break;
- default:
- /* oops */
- break;
- }
- if (hw->mac.type == e1000_pch_spt) {
- netdev->features &= ~NETIF_F_TSO;
- netdev->features &= ~NETIF_F_TSO6;
- }
- }
-
/* enable transmits in the hardware, need to do this
* after setting TARC(0)
*/
@@ -7223,6 +7198,32 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
NETIF_F_RXCSUM |
NETIF_F_HW_CSUM);
+ /* disable TSO for pcie and 10/100 speeds to avoid
+ * some hardware issues and for i219 to fix transfer
+ * speed being capped at 60%
+ */
+ if (!(adapter->flags & FLAG_TSO_FORCE)) {
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ case SPEED_100:
+ e_info("10/100 speed: disabling TSO\n");
+ netdev->features &= ~NETIF_F_TSO;
+ netdev->features &= ~NETIF_F_TSO6;
+ break;
+ case SPEED_1000:
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+ break;
+ default:
+ /* oops */
+ break;
+ }
+ if (hw->mac.type == e1000_pch_spt) {
+ netdev->features &= ~NETIF_F_TSO;
+ netdev->features &= ~NETIF_F_TSO6;
+ }
+ }
+
/* Set user-changeable features (subset of all device features) */
netdev->hw_features = netdev->features;
netdev->hw_features |= NETIF_F_RXFCS;
--
2.39.2
