From: Michael Sit Wei Hong <michael.wei.hong.sit@xxxxxxxxx>
[ Upstream commit 8fbc10b995a506e173f1080dfa2764f232a65e02 ]
Some DT devices already have phy device configured in the DT/ACPI.
Current implementation scans for a phy unconditionally even though
there is a phy listed in the DT/ACPI and already attached.
We should check the fwnode if there is any phy device listed in
fwnode and decide whether to scan for a phy to attach to.
Fixes: fe2cfbc96803 ("net: stmmac: check if MAC needs to attach to a PHY")
Reported-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/lkml/20230403212434.296975-1-martin.blumenstingl@xxxxxxxxxxxxxx/
Tested-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Tested-by: Shahab Vahedi <shahab@xxxxxxxxxxxx>
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Tested-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Suggested-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@xxxxxxxxx>
Link: https://lore.kernel.org/r/20230406024541.3556305-1-michael.wei.hong.sit@xxxxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4888536a31500..622b95bfb0b2b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1134,22 +1134,26 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
static int stmmac_init_phy(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
+ struct fwnode_handle *phy_fwnode;
struct fwnode_handle *fwnode;
- bool phy_needed;
int ret;
+ if (!phylink_expects_phy(priv->phylink))
+ return 0;
+
fwnode = of_fwnode_handle(priv->plat->phylink_node);
if (!fwnode)
fwnode = dev_fwnode(priv->device);
if (fwnode)
- ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0);
+ phy_fwnode = fwnode_get_phy_node(fwnode);
+ else
+ phy_fwnode = NULL;
- phy_needed = phylink_expects_phy(priv->phylink);
/* Some DT bindings do not set-up the PHY handle. Let's try to
* manually parse it
*/
- if (!fwnode || phy_needed || ret) {
+ if (!phy_fwnode || IS_ERR(phy_fwnode)) {
int addr = priv->plat->phy_addr;
struct phy_device *phydev;
@@ -1165,6 +1169,9 @@ static int stmmac_init_phy(struct net_device *dev)
}
ret = phylink_connect_phy(priv->phylink, phydev);
+ } else {
+ fwnode_handle_put(phy_fwnode);
+ ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0);
}
if (!priv->plat->pmt) {
--
2.39.2
