From: Hans de Goede <hdegoede@xxxxxxxxxx>
commit e3271a5917d1501089b1a224d702aa053e2877f4 upstream.
Commit 5829f8a897e4 ("platform/x86: ideapad-laptop: Send
KEY_TOUCHPAD_TOGGLE on some models") made ideapad-laptop send
KEY_TOUCHPAD_TOGGLE when we receive an ACPI notify with VPC event bit 5 set
and the touchpad-state has not been changed by the EC itself already.
This was done under the assumption that this would be good to do to make
the touchpad-toggle hotkey work on newer models where the EC does not
toggle the touchpad on/off itself (because it is not routed through
the PS/2 controller, but uses I2C).
But it turns out that at least some models, e.g. the Yoga 7-15ITL5 the EC
triggers an ACPI notify with VPC event bit 5 set on resume, which would
now cause a spurious KEY_TOUCHPAD_TOGGLE on resume to which the desktop
environment responds by disabling the touchpad in software, breaking
the touchpad (until manually re-enabled) on resume.
It was never confirmed that sending KEY_TOUCHPAD_TOGGLE actually improves
things on new models and at least some new models like the Yoga 7-15ITL5
don't have a touchpad on/off toggle hotkey at all, while still sending
ACPI notify events with VPC event bit 5 set.
So it seems best to revert the change to send KEY_TOUCHPAD_TOGGLE when
receiving an ACPI notify events with VPC event bit 5 and the touchpad
state as reported by the EC has not changed.
Note this is not a full revert the code to cache the last EC touchpad
state is kept to avoid sending spurious KEY_TOUCHPAD_ON / _OFF events
on resume.
Fixes: 5829f8a897e4 ("platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217234
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230330194644.64628-1-hdegoede@xxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/platform/x86/ideapad-laptop.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -1164,7 +1164,6 @@ static const struct key_entry ideapad_ke
{ KE_KEY, 65, { KEY_PROG4 } },
{ KE_KEY, 66, { KEY_TOUCHPAD_OFF } },
{ KE_KEY, 67, { KEY_TOUCHPAD_ON } },
- { KE_KEY, 68, { KEY_TOUCHPAD_TOGGLE } },
{ KE_KEY, 128, { KEY_ESC } },
/*
@@ -1520,18 +1519,16 @@ static void ideapad_sync_touchpad_state(
if (priv->features.ctrl_ps2_aux_port)
i8042_command(¶m, value ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE);
- if (send_events) {
- /*
- * On older models the EC controls the touchpad and toggles it
- * on/off itself, in this case we report KEY_TOUCHPAD_ON/_OFF.
- * If the EC did not toggle, report KEY_TOUCHPAD_TOGGLE.
- */
- if (value != priv->r_touchpad_val) {
- ideapad_input_report(priv, value ? 67 : 66);
- sysfs_notify(&priv->platform_device->dev.kobj, NULL, "touchpad");
- } else {
- ideapad_input_report(priv, 68);
- }
+ /*
+ * On older models the EC controls the touchpad and toggles it on/off
+ * itself, in this case we report KEY_TOUCHPAD_ON/_OFF. Some models do
+ * an acpi-notify with VPC bit 5 set on resume, so this function get
+ * called with send_events=true on every resume. Therefor if the EC did
+ * not toggle, do nothing to avoid sending spurious KEY_TOUCHPAD_TOGGLE.
+ */
+ if (send_events && value != priv->r_touchpad_val) {
+ ideapad_input_report(priv, value ? 67 : 66);
+ sysfs_notify(&priv->platform_device->dev.kobj, NULL, "touchpad");
}
priv->r_touchpad_val = value;
