On 3/31/23 15:34, Alex G. wrote:
On 3/31/23 07:10, Sascha Hauer wrote:
This series fixes two bugs in the RTW88 USB driver I was reported from
several people and that I also encountered myself.
The first one resulted in "timed out to flush queue 3" messages from the
driver and sometimes a complete stall of the TX queues.
The second one is specific to the RTW8821CU chipset. Here 2GHz networks
were hardly seen and impossible to connect to. This goes down to
misinterpreting the rfe_option field in the efuse.
I applied both these patches, tested an 8821CU, and the news are good:
The number of kernel warnings and adapter hangs has gone down considerably.
The signal levels on 2.4GHz bands have improved noticeably. There is the
occasional station coming in 30dB lower than on nearby adapters. I wasn't able
to find a pattern here.
I can now run these adapters in IBSS and 802.11s modes on the 2.4 GHz band. That
was not possible before.
I am impressed with the improvements in these patches. For the series:
Tested-by: Alexandru gagniuc <mr.nuke.me@xxxxxxxxx>
Sascha Hauer (2):
wifi: rtw88: usb: fix priority queue to endpoint mapping
wifi: rtw88: rtw8821c: Fix rfe_option field width
drivers/net/wireless/realtek/rtw88/rtw8821c.c | 3 +- >> drivers/net/wireless/realtek/rtw88/usb.c | 70 +++++++++++++------
2 files changed, 48 insertions(+), 25 deletions(-)
I can confirm that these changes cleared up my problems with the "timed out to
flush queue" warnings that caused a problem before with my rtw8822bu.
Tested-by: Larry Finger <Larry,Finger@xxxxxxxxxxxx>