Use timings.mode value instead of checking tRC_min timing
for EDO mode support.
Signed-off-by: Christophe Kerello <christophe.kerello@xxxxxxxxxxx>
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Cc: stable@xxxxxxxxxxxxxxx #v5.10+
Reviewed-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
Changes in v3:
- Fixes added
- Cc to stable added
- Tudor Reviewed-by added
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 3abb63d00a0b..9e74bcd90aaa 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1531,7 +1531,7 @@ static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
if (IS_ERR(sdrt))
return PTR_ERR(sdrt);
- if (sdrt->tRC_min < 30000)
+ if (conf->timings.mode > 3)
return -EOPNOTSUPP;
if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
--
2.25.1
