From: Ziyang Huang <hzyitc@xxxxxxxxxxx>
commit 82f5332d3b9872ab5b287e85c57b76d8bb640cd1 upstream.
Some boards might use USB-A female connector for USB ports, however,
the port could be connected to a dual-mode USB controller, making it
also behaves as a peripheral device if male-to-male cable is connected.
In this case, the dts looks like this:
&usb0 {
status = "okay";
dr_mode = "otg";
usb-role-switch;
role-switch-default-mode = "host";
};
After boot, dwc2_ovr_init() sets GOTGCTL to GOTGCTL_AVALOVAL and call
dwc2_force_mode() with parameter host=false, which causes inconsistent
mode - The hardware is in peripheral mode while the kernel status is
in host mode.
What we can do now is to call dwc2_drd_role_sw_set() to switch to
device mode, and everything should work just fine now, even switching
back to none(default) mode afterwards.
Fixes: e14acb876985 ("usb: dwc2: drd: add role-switch-default-node support")
Cc: stable <stable@xxxxxxxxxx>
Signed-off-by: Ziyang Huang <hzyitc@xxxxxxxxxxx>
Tested-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
Acked-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
Reviewed-by: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/SG2PR01MB204837BF68EDB0E343D2A375C9A59@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/dwc2/drd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -35,7 +35,8 @@ static void dwc2_ovr_init(struct dwc2_hs
spin_unlock_irqrestore(&hsotg->lock, flags);
- dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST));
+ dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST) ||
+ (hsotg->role_sw_default_mode == USB_DR_MODE_HOST));
}
static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
