3.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
commit dd318b0df27c582ac0d72a346fd6e693700be23c upstream.
Sometimes the MNR and MST interrupts happen simultaneously (stop automatically
follows NACK, according to the manuals) and in such case the ID_NACK flag isn't
set since the MST interrupt handling precedes MNR and all interrupts are cleared
and disabled then, so that MNR interrupt is never noticed -- this causes NACK'ed
transfers to be falsely reported as successful. Exchanging MNR and MST handlers
fixes this issue, however the MNR bit somehow gets set again even after being
explicitly cleared, so I decided to completely suppress handling of all disabled
interrupts (which is a good thing anyway)...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-rcar.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -372,18 +372,15 @@ static irqreturn_t rcar_i2c_irq(int irq,
msr = rcar_i2c_read(priv, ICMSR);
+ /* Only handle interrupts that are currently enabled */
+ msr &= rcar_i2c_read(priv, ICMIER);
+
/* Arbitration lost */
if (msr & MAL) {
rcar_i2c_flags_set(priv, (ID_DONE | ID_ARBLOST));
goto out;
}
- /* Stop */
- if (msr & MST) {
- rcar_i2c_flags_set(priv, ID_DONE);
- goto out;
- }
-
/* Nack */
if (msr & MNR) {
/* go to stop phase */
@@ -393,6 +390,12 @@ static irqreturn_t rcar_i2c_irq(int irq,
goto out;
}
+ /* Stop */
+ if (msr & MST) {
+ rcar_i2c_flags_set(priv, ID_DONE);
+ goto out;
+ }
+
if (rcar_i2c_is_recv(priv))
rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr));
else
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html