From: Geoff Levand <geoff@xxxxxxxxxxxxx>
[ Upstream commit 19b3bb51c3bc288b3f2c6f8c4450b0f548320625 ]
The Gelic Ethernet device needs to have the RX sk_buffs aligned to
GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must
be a multiple of GELIC_NET_RXBUF_ALIGN.
The current Gelic Ethernet driver was not allocating sk_buffs large
enough to allow for this alignment.
Also, correct the maximum and minimum MTU sizes, and add a new
preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME.
Fixes various randomly occurring runtime network errors.
Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3")
Signed-off-by: Geoff Levand <geoff@xxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/toshiba/ps3_gelic_net.c | 19 ++++++++++---------
drivers/net/ethernet/toshiba/ps3_gelic_net.h | 5 +++--
2 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index cf8de8a7a8a1e..dffd664e65f4e 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -365,26 +365,27 @@ static int gelic_card_init_chain(struct gelic_card *card,
*
* allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
* Activate the descriptor state-wise
+ *
+ * Gelic RX sk_buffs must be aligned to GELIC_NET_RXBUF_ALIGN and the length
+ * must be a multiple of GELIC_NET_RXBUF_ALIGN.
*/
static int gelic_descr_prepare_rx(struct gelic_card *card,
struct gelic_descr *descr)
{
+ static const unsigned int rx_skb_size =
+ ALIGN(GELIC_NET_MAX_FRAME, GELIC_NET_RXBUF_ALIGN) +
+ GELIC_NET_RXBUF_ALIGN - 1;
int offset;
- unsigned int bufsize;
if (gelic_descr_get_status(descr) != GELIC_DESCR_DMA_NOT_IN_USE)
dev_info(ctodev(card), "%s: ERROR status\n", __func__);
- /* we need to round up the buffer size to a multiple of 128 */
- bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
- /* and we need to have it 128 byte aligned, therefore we allocate a
- * bit more */
- descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1);
+ descr->skb = netdev_alloc_skb(*card->netdev, rx_skb_size);
if (!descr->skb) {
descr->buf_addr = 0; /* tell DMAC don't touch memory */
return -ENOMEM;
}
- descr->buf_size = cpu_to_be32(bufsize);
+ descr->buf_size = cpu_to_be32(rx_skb_size);
descr->dmac_cmd_status = 0;
descr->result_size = 0;
descr->valid_size = 0;
@@ -397,7 +398,7 @@ static int gelic_descr_prepare_rx(struct gelic_card *card,
/* io-mmu-map the skb */
descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
descr->skb->data,
- GELIC_NET_MAX_MTU,
+ GELIC_NET_MAX_FRAME,
DMA_FROM_DEVICE));
if (!descr->buf_addr) {
dev_kfree_skb_any(descr->skb);
@@ -915,7 +916,7 @@ static void gelic_net_pass_skb_up(struct gelic_descr *descr,
data_error = be32_to_cpu(descr->data_error);
/* unmap skb buffer */
dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr),
- GELIC_NET_MAX_MTU,
+ GELIC_NET_MAX_FRAME,
DMA_FROM_DEVICE);
skb_put(skb, be32_to_cpu(descr->valid_size)?
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
index 68f324ed4eaf0..0d98defb011ed 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
@@ -19,8 +19,9 @@
#define GELIC_NET_RX_DESCRIPTORS 128 /* num of descriptors */
#define GELIC_NET_TX_DESCRIPTORS 128 /* num of descriptors */
-#define GELIC_NET_MAX_MTU VLAN_ETH_FRAME_LEN
-#define GELIC_NET_MIN_MTU VLAN_ETH_ZLEN
+#define GELIC_NET_MAX_FRAME 2312
+#define GELIC_NET_MAX_MTU 2294
+#define GELIC_NET_MIN_MTU 64
#define GELIC_NET_RXBUF_ALIGN 128
#define GELIC_CARD_RX_CSUM_DEFAULT 1 /* hw chksum */
#define GELIC_NET_WATCHDOG_TIMEOUT 5*HZ
--
2.39.2
