From: Andrew Halaney <ahalaney@xxxxxxxxxx>
[ Upstream commit feafeb53140af3cde3fba46b292b15b3a0c0635c ]
The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:
./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml
Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.
Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 96f5947ed5f41..3af4c76369741 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -99,8 +99,6 @@ &eqos {
phy-handle = <ðphy0>;
nvmem-cells = <&fec_mac1>;
nvmem-cell-names = "mac-address";
- snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
- snps,reset-delays-us = <10 20 200000>;
status = "okay";
mdio {
@@ -114,6 +112,9 @@ ethphy0: ethernet-phy@0 {
eee-broken-1000t;
qca,disable-smarteee;
qca,disable-hibernation-mode;
+ reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <20>;
+ reset-deassert-us = <200000>;
vddio-supply = <&vddio0>;
vddio0: vddio-regulator {
--
2.39.2
