From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
[ Upstream commit 636e8adf7878eab3614250234341bde45537f47a ]
Currently, when dsa_slave_change_mtu() is called on a user port where
dev->max_mtu is 1500 (as returned by ds->ops->port_max_mtu()), the code
will stumble upon this check:
if (new_master_mtu > mtu_limit)
return -ERANGE;
because new_master_mtu is adjusted for the tagger overhead but mtu_limit
is not.
But it would be good if the logic went through, for example if the DSA
master really depends on an MTU adjustment to accept DSA-tagged frames.
To make the code pass through the check, we need to adjust mtu_limit for
the overhead as well, if the minimum restriction was caused by the DSA
user port's MTU (dev->max_mtu). A DSA user port MTU and a DSA master MTU
are always offset by the protocol overhead.
Currently no drivers return 1500 .port_max_mtu(), but this is only
temporary and a bug in itself - mv88e6xxx should have done that, but
since commit b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when
setting MTU for DSA and CPU ports") it no longer does. This is a
preparation for fixing that.
Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Reviewed-by: Simon Horman <simon.horman@xxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
net/dsa/slave.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index aab79c3552249..6711ddc0a3c7d 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1899,6 +1899,7 @@ int dsa_slave_change_mtu(struct net_device *dev, int new_mtu)
int new_master_mtu;
int old_master_mtu;
int mtu_limit;
+ int overhead;
int cpu_mtu;
int err;
@@ -1927,9 +1928,10 @@ int dsa_slave_change_mtu(struct net_device *dev, int new_mtu)
largest_mtu = slave_mtu;
}
- mtu_limit = min_t(int, master->max_mtu, dev->max_mtu);
+ overhead = dsa_tag_protocol_overhead(cpu_dp->tag_ops);
+ mtu_limit = min_t(int, master->max_mtu, dev->max_mtu + overhead);
old_master_mtu = master->mtu;
- new_master_mtu = largest_mtu + dsa_tag_protocol_overhead(cpu_dp->tag_ops);
+ new_master_mtu = largest_mtu + overhead;
if (new_master_mtu > mtu_limit)
return -ERANGE;
@@ -1964,8 +1966,7 @@ int dsa_slave_change_mtu(struct net_device *dev, int new_mtu)
out_port_failed:
if (new_master_mtu != old_master_mtu)
- dsa_port_mtu_change(cpu_dp, old_master_mtu -
- dsa_tag_protocol_overhead(cpu_dp->tag_ops));
+ dsa_port_mtu_change(cpu_dp, old_master_mtu - overhead);
out_cpu_failed:
if (new_master_mtu != old_master_mtu)
dev_set_mtu(master, old_master_mtu);
--
2.39.2
